
Europi surface mount
Allen-Synthesis/EuroPi
EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico

This project demonstrates a full-cycle embedded development process: Requirements Engineering → SysML Architecture → Hardware Design (PCB) → Firmware Implementation.
ProyectoSE is an open-source printed circuit board by AlvaroPintado, from the AlvaroPintado/SmartLamp repository on GitHub. It is a 2-layer board of 57 × 58 mm with 18 parts on 32 nets, routed with 97 tracks and 0 vias.
It is built around the L7805. Its parts include 10 connectors, 4 capacitors, 2 ICs, 1 resistor and 1 crystal. It belongs with the PIC boards of this library.
SmartLamp is a comprehensive embedded system designed to monitor study environments and automate lighting and ventilation. It integrates analog and digital sensors with real-time actuation, communicating via a custom UART protocol to a PC interface.
This project demonstrates a full-cycle embedded development process: Requirements Engineering → SysML Architecture → Hardware Design (PCB) → Firmware Implementation.
The project follows a structured engineering workflow separating development artifacts, documentation, and datasheets.
SmartLamp/
├── Desarrollo/ # Main Development Directory
│ ├── KiCad/ # Hardware Design Source
│ │ ├── ProyectoSE.kicad_sch # Electronic Schematics
│ │ └── ProyectoSE.kicad_pcb # PCB Layout
│ │
│ ├── MPLAB/ # Firmware Source Code
│ │ ├── Code/ # Application Logic
│ │ │ ├── main.c # Main Loop & Interrupt Service Routines
│ │ │ └── [Test Files].c # Unit tests for subsystems
│ │ │
│ │ └── Functions/ # Hardware Abstraction Layer (HAL)
│ │ ├── adc-v1.c/h # Analog-to-Digital Converter Driver
│ │ ├── i2c-v2.c/h # I2C Protocol Driver (Hardware MSSP)
│ │ ├── pwm-v1.c/h # PWM Driver (Timer 2 + CCP)
│ │ ├── spi-master-v1.c/h # SPI Driver (Software Implementation)
│ │ └── uart-v1.c/h # UART Driver (Circular Buffer logic)
│ │
│ └── Papyrus/ # System Architecture Models (UML/SysML)
│
├── Imde-comp/ # PC Interface Software (Component)
├── Hojas técnicas-20251026/ # Component Datasheets (Sensors/MCU)
└── Documentación/ # Project DocumentationThe firmware is designed with modularity in mind. The main.c handles the high-level business logic and state management, while the Functions/ folder contains reusable drivers that abstract the PIC16F886 hardware registers.
The hardware includes signal conditioning for analog sensors and logic level translation for the communication bus.
Communication between the SmartLamp and the PC is handled via a binary protocol with the following frame structure:
| Header | Length | Command | Payload | CRC (Dummy) |
|---|---|---|---|---|
0xAA | 1 Byte | 1 Byte | N Bytes | 2 Bytes |
Command Examples:
0x04: Set Fan Speed (Payload: 0-100%).0x05: Set LED Color (Payload: R, G, B, Intensity).0x02: Read CO2 Level (Response: ppm).git clone [https://github.com/aghidalgo04/SmartLamp.git](https://github.com/aghidalgo04/SmartLamp.git)Desarrollo/MPLAB.Production > Build Project)..hex file using a PICkit 3/4 programmer.| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | i | MountingHole:MountingHole_4mm_Pad | J7, J8, J9, J10 |
| 2 | 0.33uF | Capacitor_THT:C_Disc_D6.0mm_W4.4mm_P5.00mm | C3, C4 |
| 2 | 22pF | Capacitor_THT:C_Disc_D7.5mm_W5.0mm_P10.00mm | C1, C2 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | Crystal 20MHz | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | PIC16F886-IP | Package_DIP:DIP-28_W7.62mm | U1 |
| 1 | R_US | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | SPI | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | USART | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | i | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J4 |

Allen-Synthesis/EuroPi
EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico

peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.


Tircown/ERCF-easy-brd
More informations on how to reset for flashing:\ https://wiki.seeedstudio.com/Seeeduino-XIAO/#enter-bootloader-mode

matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

NikodemBartnik/Mini-Mars-Rover
Educational robotic platform made to look like a mini mars rover

starlightk7/OpenSFC
OSHW Reproduction Parts related to the Super Famicom / Super Nintendo game console

Redherring32/OpenTendo-TopLoader
An Open Source HardWare (OSHW) recreation of the 1993 toploading NES motherboard (Also known as NES-101)
It measures 57 × 58 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AlvaroPintado/SmartLamp repository on GitHub, at the commit this page was made from: the board is Desarrollo/KiCad/ProyectoSE.kicad_pcb and its schematic Desarrollo/KiCad/ProyectoSE.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask AlvaroPintado before reusing the design.