
Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Cashboxes and Dispensers emulators on arduino
FakeCashboxNDispenserBoard is an open-source printed circuit board by Allexin, from the Allexin/FakeCnD repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 11 parts on 31 nets, routed with 80 tracks and 2 vias.
Its parts include 6 resistors, 3 switches and 2 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Cashboxes and Dispensers emulators on arduino

This is simple project for cash terminals developers.
Simple change settings of emulator in config.h, and upload sketch to yours arduino.
Connect arduino to PC and start testing.
Available emulators:
Puloon LCDM 2000
Generic ccnet bill validator
GEneric cctalk bill validator
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | R4700oHm | Resistors_ThroughHole:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R4, R5, R6 |
| 3 | SW_PUSH | Buttons_Switches_ThroughHole:SW_PUSH-12mm | SW1, SW2, SW3 |
| 1 | Arduino_Nano_Header | w_conn_misc:arduino_nano_header | J1 |
| 1 | CONN_01X04 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | P1 |
| 1 | R2200Ohm | Resistors_ThroughHole:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2 |
| 1 | R2200oHm | Resistors_ThroughHole:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1 |
| 1 | R3000oHm | Resistors_ThroughHole:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R3 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Allexin/FakeCnD repository on GitHub, at the commit this page was made from: the board is schematic/FakeCashboxNDispenserBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).