

- Size
- 100 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 109
- Nets
- 73
- Pads
- 375
- Tracks, vias
- 423, 249
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Jul 2025
- Updated
- 27 Jan 2026
Overview
QuietLDO is an open-source printed circuit board by AlicDanclic, from the AlicDanclic/Signal_and_Communication_ElecCompetition_Learning repository on GitHub. It is a 2-layer board of 100 × 50 mm with 109 parts on 73 nets, routed with 423 tracks and 249 vias.
Its parts include 41 capacitors, 32 resistors, 18 connectors, 5 ICs and 4 diodes.
README
Readme.md信号电赛备战
待完成项目
- 无线运动传感器节点设计
- 信号失真度测量装置
- 无线环境监测模拟装置
- 微弱信号检测装置
- 频率补偿电路
- 调幅信号处理实验电路
- 无线话筒扩音系统
- 数字频率计
- 红外光通信装置
- 锁定放大器
- 增益可控射频放大器
- ∑-Δ 型 ADC 转换电路设计
- 自适应滤波器
- 数字-模拟信号混合传输收发机
- 信号调制方式识别与参数估计装置
已有模块
基于TPS7A4701RGWR的低噪声射频LDO
包含5V默认输出,3V3默认输出,1V8默认输出,拨码开关可调输出
整个系统通过MP2236进行初步降压,由于MP2236最大输出为6A,考虑1.5倍余量来说,负载端的最大输出应该使用4A左右,正好可以搭配4个TPS7A4701.
已有代码
| 代码名/地址 | 完成时间 | 功能介绍 |
|---|---|---|
FPGA知识
信号PCB设计知识
信号处理
Parts
109| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 10uF | persional_library:C0603 | C10, C11, C12, C13, C15, C16, C18, C19, C20, C21, C23, C24, C26, C27, C28, C29 +8 |
| 18 | NC | persional_library:R0603 | R1, R2, R4, R5, R11, R12, R14, R15, R16, R17, R18, R20, R21, R22, R23, R24 +2 |
| 16 | ~ | persional_library:CONN-TH_2P-P1.25_XUNPU_WAFER-GH1.25-2PWB | CN1, CN2, CN3, CN4, CN5, CN6, CN7, CN8, CN9, CN10, CN11, CN12, CN13, CN14, CN15, CN16 |
| 8 | 1uF | persional_library:C0603 | C1, C2, C9, C14, C17, C22, C25, C30 |
| 6 | 0Ω | persional_library:R0603 | R3, R6, R9, R10, R13, R19 |
| 5 | 10kΩ | persional_library:R0603 | R25, R26, R27, R28, R33 |
| 5 | 22uF | persional_library:C0805 | C34, C35, C36, C39, C40 |
| 4 | ~ | persional_library:VQFN-20_L5.0-W5.0-P0.65-TL-EP | U1, U2, U3, U4 |
| 4 | ~ | persional_library:m3 125x300 | hole1, hole2, hole3, hole4 |
| 4 | ~ | persional_library:LED0603-RD | LED1, LED2, LED3, LED4 |
| 2 | 1uF | persional_library:C0805 | C33, C41 |
| 1 | 100kΩ | persional_library:R0603 | R35 |
| 1 | 100nF | persional_library:C0805 | C38 |
| 1 | 10Ω | persional_library:R0603 | R34 |
| 1 | 13.7kΩ | persional_library:R0603 | R36 |
| 1 | 220pF | persional_library:C0603 | C37 |
| 1 | 3.3uH | persional_library:IND-SMD_L7.0-W6.6 | L1 |
| 1 | LOGO | logo:UpSilkscreen | G*** |
| 1 | LOGO | logo:Down_logo_2 | G*** |
| 1 | ~ | persional_library:CONN-TH_XT30PW-M | CN17 |
| 1 | ~ | persional_library:SOT-23-8_L2.9-W1.6-P0.65-LS2.8-BR | U5 |
| 1 | ~ | persional_library:CONN-TH_2P-P2.50_HX25003-2A | CN18 |
| 1 | ~ | persional_library:SW-SMD_16P-L11.7-W5.4-P1.27-LS8.5 | SW2 |
| 1 | ~ | persional_library:SW-TH_SK12D07VG4 | SW1 |
More from AlicDanclic/Signal_and_Communication_ElecCompetition_Learning
1- 2 layers45 × 25 mm

Similar boards
- 2 layers208.8 × 393.9 mm

Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
109 parts1.3k - 2 layers89 × 100 mm

Hub16
joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!
109 parts388 - 2 layers191.8 × 121.3 mm

8-Bit CPU 32k
slu4coder/Minimal-UART-Computer-1-2
Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed
109 parts184 - 2 layers77.4 × 128.5 mm

- 2 layers110 × 97.2 mm

PcbBot
BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.
109 parts94BSD-3-Clause - 2 layers126.5 × 103.6 mm

- 2 layers55 × 100 mm

- 2 layers70.5 × 128.3 mm

Questions
How big is the QuietLDO PCB?
It measures 100 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the QuietLDO use?
109 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the QuietLDO KiCad files?
From the AlicDanclic/Signal_and_Communication_ElecCompetition_Learning repository on GitHub, at the commit this page was made from: the board is Hardware/QuietLDO/QuietLDO.kicad_pcb and its schematic Hardware/ADC_version1/ADC_version1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the QuietLDO design in my own project?
Its repository states no licence, so its author keeps all rights: ask AlicDanclic before reusing the design.