Skip to the content
2 layers96 × 70 mmM4cr0pad, the printed circuit board in 3D

My first project to learn GitHub, KiCad, and Fusion. Oh, and it's also a macropad.

Size
96 × 70 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
14
Pads
59
Tracks, vias
92, 1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
4 Aug 2026
Updated
8 Aug 2026

Overview

M4cr0pad is an open-source printed circuit board by Alexitinin, from the Alexitinin/M4cr0pad repository on GitHub, published under the MIT licence. It is a 2-layer board of 96 × 70 mm with 14 parts on 14 nets, routed with 92 tracks and 1 via.

Its parts include 7 switches, 1 IC and 1 connector. It belongs with the keyboards and input boards of this library.

README

README.md

M4cr0pad

My first project to learn GitHub, KiCad, and Fusion. Oh, and it's also a macropad.

Parts

14
QtyValueFootprintReferences
6SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3, SW4, SW5, SW6
1LOGOLOGOG***
1MOUDLE-SEEEDUINO-XIAOfootprints:XIAO-Generic-Hybrid-14P-2.54-21X17.8MMU1
1RotaryEncoder_Switchencoders:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW7
1oledKiCad-SSD1306-0.91-OLED-4pin-128x32.pretty-master:SSD1306-0.91-OLED-4pin-128x32J1

The 10 most common of 14 parts.

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the M4cr0pad PCB?

It measures 96 × 70 mm and has 2 copper layers, 1.6 mm thick.

What parts does the M4cr0pad use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the M4cr0pad KiCad files?

From the Alexitinin/M4cr0pad repository on GitHub, at the commit this page was made from: the board is pcb/M4cr0pad.kicad_pcb and its schematic pcb/M4cr0pad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the M4cr0pad design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).