6 layers58.6 × 38 mm
Rosenberger 32K242-40ML5 testboard v2
toammann/Multilayer_SMA2Microstrip
Development of an SMA coaxial to microstrip transition using open source software (openEMS)
2 parts55CC0-1.0
6 layers
KAMAZ Power PCB
Alexandr-Filatov/KAMAZ_Power_PCB- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 2
- Nets
- 19
- Pads
- 2
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 7 (file 20221018)
- Created
- 14 Sep 2023
- Updated
- 11 Dec 2024
Overview
KAMAZ Power PCB is an open-source printed circuit board by Alexandr-Filatov, from the Alexandr-Filatov/KAMAZ_Power_PCB repository on GitHub. It is a 6-layer board with 2 parts on 19 nets.
Its parts include 1 capacitor and 1 connector.
Parts
2| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10u | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C12 |
| 1 | C | Connector_My:Power_Wire | J7 |
Similar boards
- 6 layers11 × 18 mm
- 6 layers
Ddr3l dummy testcase-6layers
aspdac-submission-pcb-layout/PCB-Layout-Framework
This repository has been prepared from the original. Some care has been taken to remove the names of the authors.
2 parts7BSD-3-Clause - 6 layers62 × 53 mm
Kicad blind burried vias
leoheck/kicad-blind-burried-vias
Kicad 6 test project with blind-burried-vias
2 parts1 - 6 layers73.8 × 77.8 mm
ThumbWars Example Template
BeeEvolved/ThumbWars
Thumb Wars: A Open-Source Bitcoin Miner Hardware Competition
2 partsGPL-3.0 - 6 layers42.5 × 25 mm
- 6 layers20 × 13 mm
EMMC BYPASS LANDS GEOMETRY ONLY
oliverkirk-sudo/k230-c
This conditional checkpoint assigns six previously empty footprints. Its predecessor is published R8, commit f5181cb06de490fb23de0e79c619210a664b3212.
2 parts - 6 layers88.9 × 53.3 mm
Zynq
leesanghun-droid/Zynq_TEST_PCB
MAIN CHIP : XC7Z010-1CLG400C (buy link, metal mask buy link)
3 parts2
Questions
What parts does the KAMAZ Power PCB use?
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the KAMAZ Power PCB KiCad files?
From the Alexandr-Filatov/KAMAZ_Power_PCB repository on GitHub, at the commit this page was made from: the board is Силовая плата.kicad_pcb and its schematic Connector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the KAMAZ Power PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask Alexandr-Filatov before reusing the design.