4 layers68.1 × 46 mm
4 layers138.7 × 119.4 mm
- Size
- 138.7 × 119.4 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 50
- Nets
- 34
- Pads
- 179
- Tracks, vias
- 191, 28
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 16 May 2022
- Updated
- 2 Jun 2022
Overview
Power is an open-source printed circuit board by Alexandr-Filatov, from the Alexandr-Filatov/Hydrogen-PCB-Power repository on GitHub. It is a 4-layer board of 138.7 × 119.4 mm with 50 parts on 34 nets, routed with 191 tracks and 28 vias.
It is built around the TMR 1-0511, SKM100GB12T4 and HCPL-788J#500, with the LPSR 50-NP among its other parts. Its parts include 23 capacitors, 9 resistors, 5 diodes, 5 connectors and 2 fuses.
Main components
4
TMR 1-0511
SIP,17x7.6mm-40℃~+95℃ 1 1.5kV 110mVp-p 1680uF 1W 200mA 220kHz 4.5V~9V 40mA 5V 76% Short Circuit Protection、Overload protection、Light load efficient mode SIP,17x7.6mm Isolated Power Modules ROHSTRACO POWERIsolated Power ModulesSKM100GB12T4
SMDSMD IGBT Transistors / Modules ROHSSemikronIGBT Transistors / Modules
HCPL-788J#500
SOIC-16-300milSOIC-16-300mil Operational AmplifierBroadcom LimitedOperational AmplifierLPSR 50-NP
--40℃~+105℃ 12.5mV/A 4.75V~5.25V 50A - Current Sensors ROHSLEMCurrent Sensors
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C6, C8, C13, C14, C15, C17 |
| 6 | 470p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C9, C10, C16, C18, C19 |
| 4 | C_Small | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C11, C22, C23 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | R | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R2, R3, R6, R7 |
| 2 | 0.01u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C12 |
| 2 | 39 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R8 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R9 |
| 2 | C_Small | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C20, C21 |
| 2 | HCPL788J | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | D3, D5 |
| 2 | SKM100GB12T4 | IGBT_Modul:SEMITRANS_2 | D1, D2 |
| 1 | 100u | Capacitor_4pin:C4AE | C1 |
| 1 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J5 |
| 1 | Fuse | Fuse:Fuse_2512_6332Metric_Pad1.52x3.35mm_HandSolder | F1 |
| 1 | Fuse | Fuse:Fuse_2920_7451Metric_Pad2.10x5.45mm_HandSolder | F2 |
| 1 | IN+ | Connector Power:M5 | J3 |
| 1 | IN- | Connector Power:M5 | J4 |
| 1 | LPSR_50-NP | LPSR:LPSR_50 | D4 |
| 1 | L_Small | Inductor_My:Wurth | L1 |
| 1 | OUT+ | Connector Power:M5 | J2 |
| 1 | OUT- | Connector Power:M5 | J1 |
| 1 | R_Small | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | TMR_1-0511 | Converter_DCDC:Converter_DCDC_TRACO_TMR-1-xxxx_Single_THT | U1 |
Similar boards
- 4 layers60 × 100 mm
PVBatteryInverter Mainboard
Philip-Kiehnle/PVBatteryInverter
High efficient PV charging of HV-Battery with 650V-GaN power stage. A second GaN-power stage is used as a Single-Phase inverter, which enables high efficient self-consumption.
157 parts1MIT - 4 layers36 × 69 mm
- 4 layers55 × 35 mm
Pocketbeagle
beagleboard/pocketbeagle
BeagleBoard.org PocketBeagle - ultra small, ultra flexible, ultra affordable
50 parts284CC-BY-4.0 - 4 layers44 × 48 mm
- 4 layers51 × 48 mm
- 4 layers116.8 × 121.8 mm
Se30
rhalkyard/SEthernet
Modern, low-cost 10/100 Ethernet for the Macintosh SE and SE/30
50 parts167GPL-3.0 - 4 layers126.6 × 37.7 mm
Gruzik2.0
NYDEREK/LineFollower_GRUZIK2.0-light
GRUZIK2.0 is simple light construction made for "line follower light" competition
50 parts101MIT
Questions
How big is the Power PCB?
It measures 138.7 × 119.4 mm and has 4 copper layers, 4.69 mm thick.
What parts does the Power use?
50 parts, built around the TMR 1-0511, SKM100GB12T4, HCPL-788J#500 and LPSR 50-NP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Power KiCad files?
From the Alexandr-Filatov/Hydrogen-PCB-Power repository on GitHub, at the commit this page was made from: the board is Power.kicad_pcb and its schematic Power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Power design in my own project?
Its repository states no licence, so its author keeps all rights: ask Alexandr-Filatov before reusing the design.