2 layers40 × 30 mm
2 layers81.8 × 33.5 mm
Input Connector
Alexandr-Filatov/Hydrogen-PCB-InputConnector- Size
- 81.8 × 33.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 23
- Pads
- 43
- Tracks, vias
- 26, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 2 Jun 2022
- Updated
- 22 Aug 2022
Overview
Input Connector is an open-source printed circuit board by Alexandr-Filatov, from the Alexandr-Filatov/Hydrogen-PCB-InputConnector repository on GitHub. It is a 2-layer board of 81.8 × 33.5 mm with 3 parts on 23 nets, routed with 26 tracks and 0 vias.
It is built around the RS485 CAN HAT.
Main components
1Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 776228-2 | Connector_Auto:TE_776228-2 | J1 |
| 1 | RS-485/CAN | Connector_Molex:Molex_Micro-Fit_3.0_43045-0812_2x04_P3.00mm_Vertical | J2 |
| 1 | V IN | Connector_Molex:Molex_Micro-Fit_3.0_43045-0412_2x02_P3.00mm_Vertical | J3 |
Similar boards
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
- 2 layers10.5 × 83 mm
- 2 layers21.2 × 51.3 mm
Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT
Questions
How big is the Input Connector PCB?
It measures 81.8 × 33.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Input Connector use?
3 parts, built around the RS485 CAN HAT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Input Connector KiCad files?
From the Alexandr-Filatov/Hydrogen-PCB-InputConnector repository on GitHub, at the commit this page was made from: the board is Input Connector.kicad_pcb and its schematic Input Connector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Input Connector design in my own project?
Its repository states no licence, so its author keeps all rights: ask Alexandr-Filatov before reusing the design.