2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0
2 layers79.2 × 65 mm
Charge Adapter
Alexandr-Filatov/Hydrogen-PCB-ChargeAdapter- Size
- 79.2 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 4
- Pads
- 37
- Tracks, vias
- 0, 0
- Pours
- 4
- Routed
- Not yet
- KiCad
- KiCad 6 (file 20211014)
- Created
- 2 Jun 2022
- Updated
- 2 Jun 2022
Overview
Charge Adapter is an open-source printed circuit board by Alexandr-Filatov, from the Alexandr-Filatov/Hydrogen-PCB-ChargeAdapter repository on GitHub. It is a 2-layer board of 79.2 × 65 mm with 10 parts on 4 nets.
Its parts include 3 connectors, 2 resistors and 1 diode. It belongs with the interfaces and adapters boards of this library.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 5.6k | Resistor_THT:R_Axial_Power_L48.0mm_W12.5mm_P60.96mm | R1, R2 |
| 1 | Input | Connector_Molex:Molex_Micro-Fit_3.0_43045-0800_2x04_P3.00mm_Horizontal | J1 |
| 1 | NRA-04-A-12D | Relay_My:NRA-04-A-12D | D1 |
| 1 | Output | Connector_Molex:Molex_Micro-Fit_3.0_43045-0800_2x04_P3.00mm_Horizontal | J3 |
| 1 | Relay | Connector_Molex:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J2 |
Similar boards
- 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0
Questions
How big is the Charge Adapter PCB?
It measures 79.2 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Charge Adapter use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Charge Adapter KiCad files?
From the Alexandr-Filatov/Hydrogen-PCB-ChargeAdapter repository on GitHub, at the commit this page was made from: the board is Charge Adapter.kicad_pcb and its schematic Charge Adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Charge Adapter design in my own project?
Its repository states no licence, so its author keeps all rights: ask Alexandr-Filatov before reusing the design.