
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

QSOP28/QFN28 to DIP Adapter
QSOP28 DIP Adapter is an open-source printed circuit board by AlexanderMandera, from the AlexanderMandera/QSOP28-QFN28-DIP-Adapter repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 18.8 × 36.6 mm with 12 parts on 29 nets, routed with 161 tracks and 3 vias.
It belongs with the interfaces and adapters boards of this library.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x01 | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J5, J6 |
| 2 | Conn_01x14_Pin | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J2, J3 |
| 2 | G*** | kibuzzard-6550E669 | kibuzzard-6550E669, kibuzzard-6550E669 |
| 2 | G*** | kibuzzard-653FE141 | kibuzzard-653FE141, kibuzzard-653FE141 |
| 1 | G*** | kibuzzard-653FE121 | kibuzzard-653FE121 |
| 1 | G*** | kibuzzard-653FE0F3 | kibuzzard-653FE0F3 |
| 1 | QFN-28-1EP_4x4mm_P0.4mm_EP2.3x2.3mm | Package_DFN_QFN:QFN-28-1EP_4x4mm_P0.4mm_EP2.3x2.3mm | J4 |
| 1 | QSOP-28_3.9x8.7mm_P0.635mm | Lib:QSOP-28_3.9x8.7mm_P0.635mm | J1 |

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
It measures 18.8 × 36.6 mm and has 2 copper layers, 1.6 mm thick.
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AlexanderMandera/QSOP28-QFN28-DIP-Adapter repository on GitHub, at the commit this page was made from: the board is QSOP28_DIP_Adapter.kicad_pcb and its schematic QSOP28_DIP_Adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).