

ValveBox
- Size
- 55.4 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 34
- Pads
- 142
- Tracks, vias
- 175, 9
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20191123)
- Created
- 25 Feb 2020
- Updated
- 25 Feb 2020
Overview
ValveBox is an open-source printed circuit board by AlexSchmid22191, from the AlexSchmid22191/Valvolino_PCB repository on GitHub. It is a 2-layer board of 55.4 × 53.3 mm with 40 parts on 34 nets, routed with 175 tracks and 9 vias.
It is built around the IPP039N04L G. Its parts include 20 resistors, 9 connectors, 4 diodes, 4 transistors and 1 capacitor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5, R6, R7, R8, R14, R16, R18, R20 |
| 5 | Screw_Terminal_01x02 | RS_Screw:RS_Screw_Term_x2 | J2, J5, J6, J7, J8 |
| 4 | 100 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R9, R10, R11, R12 |
| 4 | 220 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3, R4 |
| 4 | 500 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R13, R15, R17, R19 |
| 4 | D_Small | Diode_SMD:D_SMA_Handsoldering | D1, D2, D3, D4 |
| 4 | IPP039N04L | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3, Q4 |
| 2 | Conn_02x04_Odd_Even | IDC:IDC_04x02 | J4, J9 |
| 1 | Arduino_Uno_Shield | Arduino2:Arduino_Uno_Shield_mod | XA1 |
| 1 | C_Small | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1 |
| 1 | Conn_02x02_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J3 |
| 1 | Conn_02x08_Odd_Even | IDC:IDC_08x02 | J1 |
| 1 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
Similar boards
- 2 layers85.9 × 44.7 mm

- 2 layers139.7 × 73.7 mm

- 2 layers149.4 × 177.4 mm

Lightsculpture
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
40 parts915 - 2 layers150 × 50 mm

EleLab v2 Bus150
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
40 parts531GPL-3.0 - 2 layers66.4 × 48.1 mm

Raspberry
Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!
40 parts456 - 2 layers44 × 44 mm

- 2 layers90.8 × 53.3 mm

- 2 layers59.6 × 109.5 mm

Drop
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
40 parts410
Questions
How big is the ValveBox PCB?
It measures 55.4 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ValveBox use?
40 parts, built around the IPP039N04L G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ValveBox KiCad files?
From the AlexSchmid22191/Valvolino_PCB repository on GitHub, at the commit this page was made from: the board is ValveBox.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ValveBox design in my own project?
Its repository states no licence, so its author keeps all rights: ask AlexSchmid22191 before reusing the design.