Skip to the content
2 layers54 × 85.7 mm37NJU22 emul RPPICO card, the printed circuit board in 3D
Size
54 × 85.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
60
Nets
78
Pads
367
Tracks, vias
832, 30
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
11 Aug 2023
Updated
11 Aug 2023

Overview

37NJU22 emul RPPICO card is an open-source printed circuit board by AlexEkb4ever, from the AlexEkb4ever/MURMULATOR_classical_scheme repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 54 × 85.7 mm with 60 parts on 78 nets, routed with 832 tracks and 30 vias.

Its parts include 27 resistors, 14 connectors, 8 capacitors, 3 diodes and 2 transistors. It belongs with the RP2040 boards of this library.

README

README.md

Image

Parts

60
QtyValueFootprintReferences
81kLIBS:R_0805_PLUSR1, R3, R5, R9, R10, R16, R21, R25
5100RLIBS:R_0805_PLUSR7, R8, R11, R12, R19
5330RLIBS:R_0805_PLUSR2, R4, R6, R22, R26
40.1uLIBS:R_0805_PLUSC2, C3, C8, C9
410kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR27, R28, R29, R30
210kLIBS:R_0805_PLUSR15, R18
210nLIBS:R_0805_PLUSC5, C7
210uCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC4, C6
22kLIBS:R_0805_PLUSR23, R24
23V3Diode_SMD:D_1206_3216MetricD2, D3
2BC850LIBS:SOT-23_PLUSQ3, Q4
2IN_AConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ8, J9
2LOGOLOGOG***, G***
110kResistor_SMD:R_0805_2012MetricR17
14148LIBS:R_0805_PLUSD1
1Audio INConnector_Audio:Jack_3.5mm_CUI_SJ1-3535NG_HorizontalJ13
1Audio OUTConnector_Audio:Jack_3.5mm_CUI_SJ1-3535NG_HorizontalJ12
1B_JJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP3
1Conn_01x01Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ11
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ10
1Conn_SDConnector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ4
1EXTConnector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_VerticalJ2
1G_JJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP2
1HDMILIBS:HDMICN1
1Micro_SD_CardLIBS:GCT-MEM2055-00-190-01-AJ3
1Mini-DIN-6LIBS:Connector_Mini-DIN_Female_6Pin_2rowsJ7
1PWRConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ5
1R_JJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1
1UARTConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ6
1VGAConnector_Dsub:DSUB-15-HD_Female_Horizontal_P2.29x1.98mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mmJ1
1raspberrypi-pico-moduleLIBS:Raspberry_Pi_Pico_SMT_THT_MOD_2U1

Similar boards

  • 2 layers35 × 50 mmGoblin, the printed circuit board in 3D

    Goblin

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    60 parts463
  • 2 layers32.9 × 119.1 mmConnector, the printed circuit board in 3D

    Connector

    thpoll83/PolyKybd

    PolyKybd

    60 parts411CERN-OHL-W-2.0
  • 2 layers35.9 × 62.7 mmRp2040-memcard, the printed circuit board in 3D

    Rp2040-memcard

    sd2psx/pcb

    The PCB must be produced in 0.8mm thickness. Production files are provided under the "Releases" tab. These do not include the through-hole OLED module.

    60 parts241
  • 2 layers58 × 110 mmBrain ui split pulse, the printed circuit board in 3D

    Brain ui split pulse

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    60 parts222
  • 2 layers52 × 90 mmEmu brd, the printed circuit board in 3D

    Emu brd

    rscott2049/DECstation2040

    A RP2040 based DECstation emulator

    60 parts212BSD-3-Clause
  • 2 layers42.5 × 80 mmSimplemixsmall, the printed circuit board in 3D

    Simplemixsmall

    nickajeglin/Eurorack-pcbs

    A collection of easy to solder DIY eurorack PCB's

    60 parts208
  • 2 layers57.4 × 12 mmZicada, the printed circuit board in 3D

    Zicada

    CoretechR/Zicada

    DIY Zigbee Multisensor

    60 parts205GPL-3.0
  • 2 layers87.9 × 123.9 mmBitdoglab, the printed circuit board in 3D

    Bitdoglab

    BitDogLab/BitDogLab

    Open-source educational hardware for embedded systems, programming, electronics, and physical computing.

    60 parts203

Questions

How big is the 37NJU22 emul RPPICO card PCB?

It measures 54 × 85.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 37NJU22 emul RPPICO card use?

60 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 37NJU22 emul RPPICO card KiCad files?

From the AlexEkb4ever/MURMULATOR_classical_scheme repository on GitHub, at the commit this page was made from: the board is kicad_files/37NJU22_emul_RPPICO_card.kicad_pcb and its schematic kicad_files/37NJU22_emul_RPPICO_card.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the 37NJU22 emul RPPICO card design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).