
Lotus58 Glow 124
TweetyDaBird/Lotus-58-Classic
A split ergo linear keyboard derived from the Lily58 family

Beampring PCB
BEAMal Rev1 is an open-source printed circuit board by Alectardy98, from the Alectardy98/pcb_BEAMal_Rev1 repository on GitHub, published under the MIT licence. It is a 2-layer board of 438 × 160.5 mm with 131 parts on 119 nets, routed with 637 tracks and 0 vias.
A Custom Replacment PCB and case, using the IBM 6580 Displaywriter System as a base

All Supported Layouts can be seen HERE
xwhatsit/QMK atmega32u4 pcb for the IBM Model F XT and IBM Bigfoot
This version has NOT YET been tested, THIS IS A SMALL PRODUCTION OF 5 UNITS, NEVER TO BE SOLD AGAIN
The PCB thickness should be 0.6mm or 0.08mm. This is thin enough to allow the board to flex into shape.
Standard glossy soldermask is probably the best choice. JLCPCB has had issues with wear on their black soldermask before. They have changed the formula, but a standard green/red/blue/yellow/purple/white/etc. glossy solder mask is probaby the safest bet for keyswitch wear resistance. Higher wear resistance might also be achieved by coating the front of the capacitive pads in silkscreen, as silkscreen is an extra layer of epoxy. I am unsure how this will affect keyfeel or actuation, however.
For connecting the board to an xwhatsit or other controller, I would recommend 3M 8132/06 100, which has the correct pitch to connect this pcb to an xwhatsit
Capacitive pad footprints have been created spificly for this project, as the White whale beamspring has an off axis footprint aligment. In order to stay true to the origional desigen philosphy, that change has been made here also. Thank you to All mesurements have beeen take from an origonal IBM Displaywrighter system (BAE). The key matrix of the PCB is custom, made by myself, guided purdeaandrei.
Released without warranty, use at your own risk.
PRs & feedback welcome!
| Authors |
Alectardy98
| Special Thanks |
purdeaandrei - For many things, this project would not have happened without him.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | MountingHole | random-keyboard-parts:Generic-Mounthole_4.6mm | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H11, H12 |
| 1 | B,5 (P11) | lib_fp:SW_CAP_IBM_B | SW_82 |
| 1 | 1,1 (F11) | lib_fp:SW_CAP_IBM_B | SW_11 |
| 1 | 1,2 (F9) | lib_fp:SW_CAP_IBM_B | SW_09 |
| 1 | 1,3 (F7) | lib_fp:SW_CAP_IBM_B | SW_07 |
| 1 | 1,4 (F5) | lib_fp:SW_CAP_IBM_B | SW_05 |
| 1 | 1,5 (F3) | lib_fp:SW_CAP_IBM_B | SW_03 |
| 1 | 1,6 (F4) | lib_fp:SW_CAP_IBM_B | SW_04 |
| 1 | 1,7 (F1) | lib_fp:SW_CAP_IBM_B | SW_01 |
| 1 | 1,8 (F2) | lib_fp:SW_CAP_IBM_B | SW_02 |
| 1 | 2,1 (F12) | lib_fp:SW_CAP_IBM_B | SW_12 |
| 1 | 2,2 (F10) | lib_fp:SW_CAP_IBM_B | SW_10 |
| 1 | 2,3 (CAPS) | lib_fp:SW_CAP_IBM_B | SW_42 |
| 1 | 2,4 (F8) | lib_fp:SW_CAP_IBM_B | SW_08 |
| 1 | 2,5 (F6) | lib_fp:SW_CAP_IBM_B | SW_06 |
| 1 | 2,6 (TAB) | lib_fp:SW_CAP_IBM_B | SW_28 |
| 1 | 2,7 (01) | lib_fp:SW_CAP_IBM_B | SW_14 |
| 1 | 2,8 (ESC) | lib_fp:SW_CAP_IBM_B | SW_13 |
| 1 | 3,1 (LCTL) | lib_fp:SW_CAP_IBM_B | SW_66 |
| 1 | 3,2 (Z) | lib_fp:SW_CAP_IBM_B | SW_55 |
| 1 | 3,3 (LSFT) | lib_fp:SW_CAP_IBM_B | SW_54 |
| 1 | 3,4 (S) | lib_fp:SW_CAP_IBM_B | SW_44 |
| 1 | 3,5 (A) | lib_fp:SW_CAP_IBM_B | SW_43 |
| 1 | 3,6 (W) | lib_fp:SW_CAP_IBM_B | SW_30 |
| 1 | 3,7 (Q) | lib_fp:SW_CAP_IBM_B | SW_29 |
| 1 | 3,8 (02) | lib_fp:SW_CAP_IBM_B | SW_15 |
| 1 | 4,1 (LALT) | lib_fp:SW_CAP_IBM_B | SW_67 |
| 1 | 4,2 (C) | lib_fp:SW_CAP_IBM_B | SW_57 |
| 1 | 4,3 (X) | lib_fp:SW_CAP_IBM_B | SW_56 |
| 1 | 4,4 (D) | lib_fp:SW_CAP_IBM_B | SW_45 |
| 1 | 4,5 (R) | lib_fp:SW_CAP_IBM_B | SW_32 |
| 1 | 4,6 (E) | lib_fp:SW_CAP_IBM_B | SW_31 |
| 1 | 4,7 (04) | lib_fp:SW_CAP_IBM_B | SW_17 |
| 1 | 4,8 (03) | lib_fp:SW_CAP_IBM_B | SW_16 |
| 1 | 5,1 (SPC) | lib_fp:SW_CAP_IBM_B | SW_68 |
| 1 | 5,2 (B) | lib_fp:SW_CAP_IBM_B | SW_59 |
| 1 | 5,3 (V) | lib_fp:SW_CAP_IBM_B | SW_58 |
| 1 | 5,4 (G) | lib_fp:SW_CAP_IBM_B | SW_47 |
| 1 | 5,5 (F) | lib_fp:SW_CAP_IBM_B | SW_46 |
| 1 | 5,6 (T) | lib_fp:SW_CAP_IBM_B | SW_33 |
| 1 | 5,7 (06) | lib_fp:SW_CAP_IBM_B | SW_19 |
| 1 | 5,8 (05) | lib_fp:SW_CAP_IBM_B | SW_18 |
| 1 | 6,1 (M) | lib_fp:SW_CAP_IBM_B | SW_61 |
| 1 | 6,2 (N) | lib_fp:SW_CAP_IBM_B | SW_60 |
| 1 | 6,3 (J) | lib_fp:SW_CAP_IBM_B | SW_49 |
| 1 | 6,4 (H) | lib_fp:SW_CAP_IBM_B | SW_48 |
| 1 | 6,5 (Y) | lib_fp:SW_CAP_IBM_B | SW_34 |
| 1 | 6,6 (U) | lib_fp:SW_CAP_IBM_B | SW_35 |
| 1 | 6,7 (08) | lib_fp:SW_CAP_IBM_B | SW_21 |
| 1 | 6,8 (07) | lib_fp:SW_CAP_IBM_B | SW_20 |
| 1 | 7,1 (DOT) | lib_fp:SW_CAP_IBM_B | SW_63 |
| 1 | 7,2 (COM) | lib_fp:SW_CAP_IBM_B | SW_62 |
| 1 | 7,3 (L) | lib_fp:SW_CAP_IBM_B | SW_51 |
| 1 | 7,4 (K) | lib_fp:SW_CAP_IBM_B | SW_50 |
| 1 | 7,5 (I) | lib_fp:SW_CAP_IBM_B | SW_36 |
| 1 | 7,6 (O) | lib_fp:SW_CAP_IBM_B | SW_37 |
| 1 | 7,7 (00) | lib_fp:SW_CAP_IBM_B | SW_23 |
| 1 | 7,8 (09) | lib_fp:SW_CAP_IBM_B | SW_22 |
| 1 | 8,1 (RALT) | lib_fp:SW_CAP_IBM_B | SW_69 |
| 1 | 8,2 (SLSH) | lib_fp:SW_CAP_IBM_B | SW_64 |
| 1 | 8,3 (QOTE) | lib_fp:SW_CAP_IBM_B | SW_53 |
| 1 | 8,4 (COLN) | lib_fp:SW_CAP_IBM_B | SW_52 |
| 1 | 8,5 (P) | lib_fp:SW_CAP_IBM_B | SW_38 |
| 1 | 8,6 (LBRC) | lib_fp:SW_CAP_IBM_B | SW_39 |
| 1 | 8,7 (PLUS) | lib_fp:SW_CAP_IBM_B | SW_25 |
| 1 | 8,8 (MINS) | lib_fp:SW_CAP_IBM_B | SW_24 |
| 1 | 9,2 (RCTL) | lib_fp:SW_CAP_IBM_B | SW_70 |
| 1 | 9,3 (RSFT) | lib_fp:SW_CAP_IBM_B | SW_65 |
| 1 | 9,4 (TEST) | lib_fp:CAL_CAP_IBM_B | SW_71 |
| 1 | 9,5 (ENT) | lib_fp:SW_CAP_IBM_B | SW_41 |
| 1 | 9,6 (RBRC) | lib_fp:SW_CAP_IBM_B | SW_40 |
| 1 | 9,7 (XTRA) | lib_fp:SW_CAP_IBM_B | SW_27 |
| 1 | 9,8 (BACK) | lib_fp:SW_CAP_IBM_B | SW_26 |
| 1 | A,1 (P22) | lib_fp:SW_CAP_IBM_B | SW_93 |
| 1 | A,2 (P21) | lib_fp:SW_CAP_IBM_B | SW_92 |
| 1 | A,3 (P18) | lib_fp:SW_CAP_IBM_B | SW_89 |
| 1 | A,4 (P17) | lib_fp:SW_CAP_IBM_B | SW_88 |
| 1 | A,5 (P13) | lib_fp:SW_CAP_IBM_B | SW_84 |
| 1 | A,6 (P09) | lib_fp:SW_CAP_IBM_B | SW_80 |
| 1 | A,7 (P05) | lib_fp:SW_CAP_IBM_B | SW_76 |
The 91 most common of 131 parts.

TweetyDaBird/Lotus-58-Classic
A split ergo linear keyboard derived from the Lily58 family

Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)



seniorsoftwarevlogger/takmak
Takmak is the 65% orthogonal staggered columns split keyboard

tmarhguy/alu
8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests


xavierbasc/dm50
DM50 is a cheap, powerful, easy to build, open source hardware, and high precision calculator.
It measures 438 × 160.5 mm and has 2 copper layers, 1.6 mm thick.
131 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Alectardy98/pcb_BEAMal_Rev1 repository on GitHub, at the commit this page was made from: the board is BEAMal_Rev1.kicad_pcb and its schematic BEAMal_Rev1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).