
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

Made by @KittyCat on Hack Club's Slack! Made as part of https://solder.hackclub.com
KittyNightBright is an open-source printed circuit board by AlanikREDAWN, from the AlanikREDAWN/kittyNightBright repository on GitHub, published under the MIT licence. It is a 2-layer board of 53.6 × 68.3 mm with 12 parts on 7 nets, routed with 48 tracks and 4 vias.
Its parts include 4 resistors, 2 diodes, 1 transistor and 1 switch.
This project is a little night light keychain that is acivated by both a button and a photoresistor!
Made by @KittyCat on Hack Club's Slack! Made as part of https://solder.hackclub.com
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | LOGO | LOGO | G***, G***, G*** |
| 2 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 2 | LED | LED_THT:LED_D5.0mm | D1, D2 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_3034_1x20mm | BT1 |
| 1 | NPN | Package_TO_SOT_THT:TO-92L_HandSolder | Q1 |
| 1 | R_Photo | OptoDevice:R_LDR_5.1x4.3mm_P3.4mm_Vertical | R4 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
It measures 53.6 × 68.3 mm and has 2 copper layers, 1.6 mm thick.
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AlanikREDAWN/kittyNightBright repository on GitHub, at the commit this page was made from: the board is src/kittyNightBright.kicad_pcb and its schematic src/kittyNightBright.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).