
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

LEDを5つ並べた基板
LEDboard is an open-source printed circuit board by Akutagawa50, from the Akutagawa50/LEDboard repository on GitHub, published under the MIT licence. It is a 2-layer board of 70 × 30 mm with 12 parts on 11 nets, routed with 43 tracks and 0 vias.
Its parts include 5 resistors, 5 diodes and 2 connectors.
LEDを5つアノードコモンで接続した基板
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 2.2K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5 |
| 5 | LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4, D5 |
| 2 | Conn_01x03 | SamacSys_Parts:EuroBlock_receptacle_2.54_3p | J1, J2 |

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
It measures 70 × 30 mm and has 2 copper layers, 1.6 mm thick.
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Akutagawa50/LEDboard repository on GitHub, at the commit this page was made from: the board is LEDboard.kicad_pcb and its schematic LEDboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).