Skip to the content
2 layers47.9 × 39.4 mmPower supply, the printed circuit board in 3D

This project is a custom-designed transformerless AC-to-DC power supply PCB developed using KiCad 10.0. The circuit converts AC mains voltage into a regulated 5V DC output suitable for low-power embedded and IoT…

Size
47.9 × 39.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
9
Pads
37
Tracks, vias
41, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
15 Jun 2026
Updated
15 Jun 2026

Overview

Power supply is an open-source printed circuit board by Akshath2002, from the Akshath2002/Transformerless-Power-Supply repository on GitHub. It is a 2-layer board of 47.9 × 39.4 mm with 18 parts on 9 nets, routed with 41 tracks and 0 vias.

It is built around the L7805. Its parts include 7 diodes, 4 capacitors, 4 resistors, 2 connectors and 1 IC. It belongs with the power boards of this library.

Main components

1

README

README.md

Transformerless 5V Power Supply PCB

Overview

This project is a custom-designed transformerless AC-to-DC power supply PCB developed using KiCad 10.0. The circuit converts AC mains voltage into a regulated 5V DC output suitable for low-power embedded and IoT applications.

The PCB was designed from schematic capture through final layout, including component selection, footprint assignment, routing, ground plane implementation, and 3D verification.

Features

  • AC mains input
  • Capacitive dropper power supply
  • Full-wave bridge rectifier using 1N4007 diodes
  • 7805 voltage regulation
  • Input surge and filtering components
  • LED power indication
  • Ground plane for improved noise performance
  • Through-hole component design
  • Two-layer PCB layout
  • Designed using KiCad 10.0

Design Workflow

Schematic Design

  • Circuit design and simulation considerations
  • Component value selection
  • Power regulation stage implementation
  • ERC verification

PCB Layout

  • Footprint selection
  • Component placement optimization
  • Power trace routing
  • Ground copper pour
  • DRC verification

Mechanical Design

  • Mounting holes
  • Terminal block connectors
  • Silkscreen labeling
  • 3D model verification

Software Used

  • KiCad 10.0

Author

Akshath Kumar Electronics and Communication Engineer

License

This project is shared for educational and learning purposes.

Parts

18
QtyValueFootprintReferences
41N4007Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1, D2, D3, D4
220kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2, R3
2D_ZenerDiode_THT:D_A-405_P7.62mm_HorizontalD5, D6
2Screw_Terminal_01x02TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mmJ1, J2
10.1uFCapacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mmC2
11000uFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC3
11MResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
12.2kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4
1225J/2.2uFCapacitor_THT:C_Rect_L18.0mm_W6.0mm_P15.00mm_FKS3_FKP3C1
1470uF 25VCapacitor_THT:CP_Radial_D10.0mm_P3.80mmC4
1L7805Package_TO_SOT_THT:TO-220-3_VerticalU1
1LEDLED_THT:LED_D5.0mmD7

Similar boards

  • 2 layers40.6 × 110 mmEuropi surface mount, the printed circuit board in 3D

    Europi surface mount

    Allen-Synthesis/EuroPi

    EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico

    92 parts584CC0-1.0
  • 2 layers132.1 × 45.7 mmIPoS, the printed circuit board in 3D

    IPoS

    peterheinrich/InternetOverSpaghetti

    Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

    42 parts342
  • 2 layers59.7 × 57.5 mmFunBox, the printed circuit board in 3D

    FunBox

    GuitarML/FunBox

    Stereo guitar pedal platform using Daisy Seed.

    61 parts289MIT
  • 2 layers90.8 × 35.6 mmERCF easy brd, the printed circuit board in 3D

    ERCF easy brd

    Tircown/ERCF-easy-brd

    More informations on how to reset for flashing:\ https://wiki.seeedstudio.com/Seeeduino-XIAO/#enter-bootloader-mode

    28 parts195GPL-3.0
  • 2 layers111.3 × 106.4 mmSuper Sixteen v1, the printed circuit board in 3D

    Super Sixteen v1

    matthewcieplak/super-sixteen

    Code and schematics for the Super Sixteen Eurorack sequencer

    141 parts171
  • 2 layers91.4 × 71.1 mmPico w rover, the printed circuit board in 3D

    Pico w rover

    NikodemBartnik/Mini-Mars-Rover

    Educational robotic platform made to look like a mini mars rover

    20 parts143MIT
  • 2 layers144.1 × 182.2 mmSHVC CPU-01, the printed circuit board in 3D

    SHVC CPU-01

    starlightk7/OpenSFC

    OSHW Reproduction Parts related to the Super Famicom / Super Nintendo game console

    498 parts114CERN-OHL-S-2.0
  • 2 layers106.1 × 155 mmMotherboard, the printed circuit board in 3D

    Motherboard

    Redherring32/OpenTendo-TopLoader

    An Open Source HardWare (OSHW) recreation of the 1993 toploading NES motherboard (Also known as NES-101)

    84 parts94

Questions

How big is the Power supply PCB?

It measures 47.9 × 39.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Power supply use?

18 parts, built around the L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Power supply KiCad files?

From the Akshath2002/Transformerless-Power-Supply repository on GitHub, at the commit this page was made from: the board is Power supply.kicad_pcb and its schematic Power supply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Power supply design in my own project?

Its repository states no licence, so its author keeps all rights: ask Akshath2002 before reusing the design.