

The 8051 Development Board is a versatile platform for programming, prototyping, and testing embedded systems. It supports various applications, including microcontroller programming, peripheral interfacing, and educational projects.
- Size
- 107.2 × 75.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 75
- Pads
- 211
- Tracks, vias
- 276, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 6 Oct 2024
- Updated
- 6 Oct 2024
Overview
8051dev is an open-source printed circuit board by Akash-Bxh, from the Akash-Bxh/8051-Development-Board repository on GitHub. It is a 2-layer board of 107.2 × 75.1 mm with 34 parts on 75 nets, routed with 276 tracks and 0 vias.
Its parts include 12 connectors, 5 capacitors, 4 resistors, 4 ICs and 3 diodes. It belongs with the microcontroller boards boards of this library.
README
README.mdBuilding an 8051 Microcontroller Development Board
Material: KiCAD software, AT895S2, PCB, soldering kit, capacitor, resistor, display, 7-segment, push button, connector, buzzer, Ferric Chloride, Acetone, Fine abrasive sand paper, etc.
An 8051 Development Board is a hardware platform for projects involving the 8051 microcontroller. It includes the microcontroller, clock and reset circuits, power supply, I/O and peripheral interfaces (ADC, DAC), and supports various development tools. Users can write programs in assembly or high-level languages, compile them, and load them onto the board using assemblers and debuggers.
Steps to make an 8051 Development Board:
- Design the Circuit: Use PCB design software like KiCAD to design the circuit and choose appropriate footprints for each component. Generate the Gerber files for the design.
- Print the Circuit on Raw PCB: Use the screen printing method to transfer the circuit design onto the raw PCB. Apply ink through a stencil and let it dry near warm air for 20-25 minutes.
- Etching Process: Submerge the PCB in ferric chloride solution to remove unwanted copper. After 10-15 minutes, clean the PCB with acetone to remove excess ink.
- Drilling: Drill holes in the PCB where electronic components will be mounted.
- Footprint Placement: Attach the printed component layout on the non-copper side to guide component placement.
- Soldering Components: Insert components on the PCB and solder them securely to the copper side.
Applications and Uses of this 8051 Development Board
- Microcontroller Programming: It allows users to load and test programs written for the 8051 microcontroller, typically in assembly or C, through an assembler and debugger.
- Hardware Testing and Development: The board provides an environment for testing I/O ports and peripheral interfaces (ADC, DAC) connected to the 8051 microcontroller. It’s used for controlling devices or reading sensor data.
- Circuit Prototyping: The board is used for prototyping embedded system designs before transferring to a final PCB design for production.
- Peripheral Interfacing: You can connect and control components like sensors, displays, and actuators, making it suitable for hardware projects and experiments.
- Learning Platform: Ideal for education in embedded systems, giving students and developers hands-on experience with 8051 microcontrollers.
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1, J2, J3, J4, J8, J10 |
| 3 | 0.1uf | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C3, C5, C6 |
| 3 | LED | LED_THT:LED_D5.0mm_Clear | D1, D2, D3 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R2, R3 |
| 2 | 22pF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C1, C2 |
| 2 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5, J6 |
| 2 | user | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW2, SW3 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 10k | Potentiometer_THT:Potentiometer_ACP_CA6-H2,5_Horizontal | RV1 |
| 1 | 11.0592MHz | Crystal:Crystal_HC18-U_Vertical | Y1 |
| 1 | 1k | Resistor_THT:R_Array_SIP9 | RN1 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 5v | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J12 |
| 1 | 8051 | Package_DIP:DIP-40_W15.24mm | U1 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J11 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | Conn_01x16_Pin | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J7 |
| 1 | D1X8K-14BL | Display_7Segment:7SegmentLED_LTS6760_LTS6780 | U3 |
| 1 | LCD-016N002L | Display:LCD-016N002L | U4 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | SW_MEC_5E | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1 |
Similar boards
- 2 layers142.5 × 106.4 mm

- 2 layers26 × 30 mm

Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 2 layers171.2 × 72.9 mm

Amiga gfxcard old
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
34 parts1k - 2 layers53.5 × 62.5 mm

Led matrix
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
34 parts915 - 2 layers45 × 26 mm

- 2 layers41.7 × 25.7 mm

Headphones flex pcb rigid
strangeparts/niubi-headphones
Flexible circuit board design for adding a headphone jack to an iPhone 7
34 parts493MIT - 2 layers18.8 × 16.3 mm

- 2 layers127 × 69.9 mm

Ezcgi
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.
34 parts446
Questions
How big is the 8051dev PCB?
It measures 107.2 × 75.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 8051dev use?
34 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 8051dev KiCad files?
From the Akash-Bxh/8051-Development-Board repository on GitHub, at the commit this page was made from: the board is 8051dev.kicad_pcb and its schematic 8051dev.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 8051dev design in my own project?
Its repository states no licence, so its author keeps all rights: ask Akash-Bxh before reusing the design.