2 layers41.9 × 71.1 mm
Gw adapters
AkBKukU/GreaseweazleExternalAdapter
Adapter PCB to easily use external floppy drives with a greaseweazle
3 parts26MIT
2 layers41.9 × 71.1 mm
Gw adapters
AkBKukU/GreaseweazleExternalAdapter26Adapter PCB to easily use external floppy drives with a greaseweazle
- Size
- 41.9 × 71.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 21
- Pads
- 79
- Tracks, vias
- 60, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 24 May 2023
- Updated
- 28 May 2023
Overview
Gw adapters is an open-source printed circuit board by AkBKukU, from the AkBKukU/GreaseweazleExternalAdapter repository on GitHub, published under the MIT licence. It is a 2-layer board of 41.9 × 71.1 mm with 3 parts on 21 nets, routed with 60 tracks and 0 vias.
It belongs with the interfaces and adapters boards of this library.
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Floppy_External_Interface_Powered | Connector_Dsub:DSUB-37_Female_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm | J3 |
| 1 | Floppy_Header | Connector_PinSocket_2.54mm:PinSocket_2x17_P2.54mm_Horizontal | J1 |
| 1 | TE 174552-1 | TE-Conn:1745521 | J2 |
More from AkBKukU/GreaseweazleExternalAdapter
1Similar boards
- 2 layers40 × 30 mm
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
- 2 layers10.5 × 83 mm
- 2 layers21.2 × 51.3 mm
Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT
Questions
How big is the Gw adapters PCB?
It measures 41.9 × 71.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Gw adapters use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gw adapters KiCad files?
From the AkBKukU/GreaseweazleExternalAdapter repository on GitHub, at the commit this page was made from: the board is 37pin-version/gw-adapters.kicad_pcb and its schematic 37pin-version/gw-adapters.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gw adapters design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).