Skip to the content
2 layersPOV PCBv1, the printed circuit board in 3D

ที่ 2000 RPM: - 33 รอบ/วินาที = 33 FPS - 240 พิกเซลต่อรอบ - 125 µs ต่อพิกเซล

Copper layers
2
Thickness
1.6 mm
Parts
24
Nets
94
Pads
132
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 10.0 (file 20260206)
Created
5 May 2026
Updated
25 May 2026

Overview

POV PCBv1 is an open-source printed circuit board by Aitthikit, from the Aitthikit/POV_Display_PCB repository on GitHub. It is a 2-layer board with 24 parts on 94 nets.

Its parts include 10 capacitors, 4 diodes and 1 resistor. It belongs with the ESP32 and AVR (ATmega, ATtiny) boards of this library.

README

README.md

POV_Display_PCB

📋 สรุปโปรเจกต์ POV Display 4 แถว LED

เอกสารสำหรับนำเสนออาจารย์ — สรุปการตัดสินใจดีไซน์ทั้งหมด


🎯 1. ภาพรวมโปรเจกต์

ชื่อโปรเจกต์: Rotating LED Display (POV - Persistence of Vision)

อ้างอิงหลัก:

  • Hackaday RD40: Rotating LED Display by lhm0
  • Royer Converter from Mikrocontroller.net

ความต่างจากต้นฉบับ:

รายการRD40 ต้นฉบับโปรเจกต์ของเรา
จำนวนแถว LED2 แถว4 แถว
LED ต่อแถว20 ตัว16 ตัว
LED รวม40 ตัว64 ตัว
MCUArduino Nano + ESP-01sArduino Nano เดียว
Image storageESP-01s WiFiPROGMEM (32KB Flash)
ขนาด rotor120mm (CD size)120mm (เท่าเดิม)

🔧 2. หลักการทำงาน

2.1 Persistence of Vision (POV)

LED จำนวนน้อยหมุนเร็วๆ + เปิด/ปิดตามจังหวะ → ตามนุษย์เห็นเป็น "ภาพเต็ม"

ที่ 2000 RPM:

  • 33 รอบ/วินาที = 33 FPS
  • 240 พิกเซลต่อรอบ
  • 125 µs ต่อพิกเซล

2.2 Wireless Power Transfer

ใช้ Royer Converter ส่งไฟไร้สายจากฐานคงที่ → บอร์ดที่หมุน

  • หลีกเลี่ยง slip ring (สึกหรอ, มี noise)
  • ใช้ PCB coil 2 ตัว coupled กันผ่านอากาศ

⚡ 3. Royer Converter (Wireless Power Source)

3.1 หลักการ Resonant Royer

  • Self-oscillating LC tank ที่ความถี่ resonance
  • ใช้ Zero Voltage Switching (ZVS) → ประสิทธิภาพ 90%+
  • สร้าง sinewave 120 kHz → secondary coil รับสนามแม่เหล็ก

3.2 สเปก Royer

Parameterค่า
ความถี่ทำงาน120 kHz
แรงดัน input12V DC adapter
กำลังที่ต้องส่ง~4-5W
MOSFETIRFZ44N × 2
Resonant cap100nF polypropylene (film)
Input choke47-100µH

🔌 4. การกระจายไฟ (Power Distribution)

text
12V DC Adapter
     │
     ▼
Royer Converter (120 kHz)
     │
     ▼
Primary PCB Coil (ฐาน)
     ║
     ║ wireless transfer (air gap 3-5mm)
     ║
     ▼
Secondary PCB Coil (rotor)
     │
     ▼
Bridge Rectifier (4× SS14 Schottky)
     │
     ▼
C1 = 220µF + C2 = 1µF ceramic (smoothing)
     │
     ▼ V_raw ~7V
     │
     ├──→ Arduino Nano VIN (regulator internal → 5V)
     │
     └──→ AMS1117-5.0 → +5V rail

💡 5. การออกแบบ LED Layout

5.1 ตำแหน่งของ 4 แถว

เลือกใช้: 45° / 135° / 225° / 315° (KiCad-friendly)

text
        แถว B (135°)
        ●●●●●●●●●●●●●●●●
                │
แถว C ──────────●────── แถว A (45°)
(225°)          │
        ●●●●●●●●●●●●●●●●
        แถว D (315°)

เหตุผล:

  • ✅ KiCad routing สนับสนุน 45° native
  • ✅ Effective scan rate = 4× ต่อรอบ
  • ✅ Mirror symmetric → balance สมบูรณ์
  • ✅ พื้นที่ว่างที่ 0/90/180/270° สำหรับวางอุปกรณ์

5.2 หลักการเลื่อนรัศมี

ในแต่ละคู่ของแถว:

  • เลื่อนรัศมี 1mm → เติม "ช่องว่างเชิงรัศมี" ระหว่าง LED
  • ทำให้ภาพต่อเนื่อง ไม่มีจุดมืด

🖥️ 6. ระบบ Control

6.1 Arduino Nano (ATmega328P, 5V logic)

Pin Assignment:

Pinหน้าที่
D2 (INT0)Hall sensor input
D10RCK (latch) ของ shift register
D11 (MOSI)SER_IN ของ shift register
D13 (SCK)SRCK ของ shift register
D9 (PWM)G_N (brightness control)
VINV_raw 7V จาก rectifier

6.2 Shift Register Cascade

  • TPIC6C595 × 8 ตัว = 64 outputs
  • ต่อ cascade ผ่าน SER_OUT → SER_IN
  • SPI 16 MHz: ส่ง 64 bit ใน 4 µs

6.3 Image Storage (PROGMEM)

  • ขนาดต่อภาพ: 960 bytes (240 มุม × 32 bit, เก็บแค่ 1 คู่)
  • Flash 32KB ของ Arduino: เก็บได้ ~25 ภาพ
  • ภาพ static, compile ใหม่เมื่อต้องการเปลี่ยน

🛒 7. BOM (Bill of Materials)

7.1 Power Section

DesignatorComponentSpecQty
D1-D4SS14 Schottky1A 40V SMA4
C1Electrolytic220µF/16V1
C2Ceramic1µF/25V X7R 08051
U10AMS1117-5.0SOT-2231
C11Tantalum22µF/10V 12061
C12Ceramic100nF/25V X7R 06031

7.2 Logic Section

DesignatorComponentSpecQty
A1Arduino NanoATmega328P, 5V1
U2-U9TPIC6C595DIP-168
U1A3144Hall sensor 5V1
R1Resistor20k pull-up1
R2-R9Resistor10k pull-up for CLR_N1 (shared)
CdecCeramic100nF × 10 (decoupling)10

7.3 LED Section

DesignatorComponentSpecQty
LED1-LED64LED 0805สีตามต้องการ64
RN1-RN8Resistor Network470Ω × 88

7.4 Wireless Power

ComponentSpec
L1 PrimaryPCB bifilar coil, 17 turns, 90/30mm
L2 CouplingPCB coil, 6 turns, 28/10mm
L3 SecondaryPCB coil, 14 turns, 90/30mm
Royer MOSFETIRFZ44N × 2
Resonant cap100nF film polypropylene

🎨 8. PCB Design Decisions

8.1 Board Specifications

Parameterค่า
ขนาด120mm diameter (CD size)
Thickness1.6mm FR4
Layers2 layers, 1oz copper
MountingCD motor spindle ตรงกลาง

8.2 Critical Design Rules

Net ClassTrace Width
Power (+5V, V_raw, GND)0.8-1.0mm
Signal (SPI, GPIO)0.2mm
LED traces0.3-0.4mm

8.3 Ground Pour & Stitching

  • Top + Bottom ground pour บนพื้นที่ว่างทั้งหมด
  • Stitching vias ทุก 10-15mm เชื่อม top/bottom GND
  • พิเศษ: vias 4-6 ตัวใกล้ AMS1117 (heat dissipation)

🔬 9. การคำนวณสำคัญ

9.1 Power Budget

LoadAverage CurrentPower @ 5V
LED 64 ตัว (duty 30%)300 mA1.5W
TPIC6C595 × 825 mA0.13W
Hall sensor10 mA0.05W
Arduino Nano40 mA0.32W (Vin=8V)
รวมที่ฝั่งหมุน~375 mA~2.0W
+ Coupling loss 30%-~2.6W
Royer ต้องส่ง-~4W

9.2 Timing ที่ 2000 RPM

  • 30 ms/รอบ
  • 240 พิกเซล/รอบ → 125 µs/พิกเซล
  • SPI 64 bit: ส่งใน 4 µs (3.2% ของ timing budget)
  • เหลือเวลา 121 µs สำหรับการคำนวณอื่น ✓

9.3 Refresh Rate

  • 4× scan ต่อรอบ × 33 rotations/sec = 133 Hz effective refresh
  • ไม่มีการกระพริบที่ตาเห็น

⚠️ 10. ความท้าทาย & การแก้ปัญหา

10.1 EMI/Noise จาก Royer

ปัญหา: Royer 120 kHz สร้างสนามแม่เหล็กแรง

การแก้:

  • Ground plane ทั้ง 2 ชั้น
  • Decoupling cap (100nF) ใกล้ทุก IC
  • Power-on reset RC สำหรับ shift register
  • A3144 อยู่ห่างจาก secondary coil อย่างน้อย 10mm

10.2 Mass Balance

ปัญหา: บอร์ดต้องสมดุลที่ความเร็ว 2000 RPM

การแก้:

  • Component placement สมมาตรกับแกน 0°-180°
  • รูยึด M2 รอบขอบ 4-8 รู สำหรับ balance weight
  • LED 4 แถว 4 ทิศ → balance อัตโนมัติ

10.3 Heat Dissipation

ปัญหา: AMS1117 drop 2V × ~400mA = 0.8-1.5W

การแก้:

  • Copper pour 2×2cm ใต้ AMS1117
  • Stitching vias เชื่อมไป bottom GND plane
  • Operating temp คาดการณ์: ~80°C (ใต้ขีดจำกัด 125°C)

📅 11. Progress & Next Steps

✅ สิ่งที่เสร็จแล้ว

  • Schematic หลัก (Arduino + LED + Power + Hall sensor)
  • Bridge rectifier + AMS1117 power supply
  • LED layout 4 แถว at 45/135/225/315°
  • PCB layout เบื้องต้น
  • BOM พร้อม part numbers
  • Capacitor selection (X7R, tantalum spec)

🚧 กำลังทำ

  • Ground pour (top + bottom)
  • Stitching vias
  • DRC check + final routing

📋 ขั้นต่อไป

  • PCB Royer driver (ฐานคงที่)
  • PCB coil design (3 coils: primary bifilar, coupling, secondary)
  • Arduino code + Python script สร้าง PROGMEM image
  • Mechanical mounting (CD motor + base)
  • Testing & calibration

📚 12. Technical References

  1. Hackaday RD40 Rotating LED Display - lhm0
    • URL: hackaday.io/project/191947-rotating-led-display
  2. Royer Converter Theory - Mikrocontroller.net
  3. AMS1117 Datasheet - Advanced Monolithic Systems
  4. TPIC6C595 Datasheet - Texas Instruments
  5. IPC-2221 - PCB Trace Current Capacity Standard

🎓 ภาคผนวก: ตารางการตัดสินใจสำคัญ

การตัดสินใจทางเลือกอื่นที่เลือกเหตุผล
MCUESP32, RP2040Arduino Nanoง่าย, รู้จัก, เพียงพอ
Power regulatorMP1584, LM7805AMS1117noise ต่ำ, ขนาดเล็ก, ใช้ง่าย
Hall sensorAH3503 (3.3V)A3144 (5V)ตรงกับ logic level Arduino
Image storageSD card, EEPROMPROGMEMง่าย, ไม่เพิ่ม component
LED layout0/90/180/270, 30/150/210/33045/135/225/315KiCad-friendly, 4× scan
Bridge diode1N4007, DB107SS14 SchottkyVf ต่ำ, เร็วพอ 120 kHz
Input cap C1100µF, 470µF220µF + 1µFbalance ระหว่าง bulk + HF filter
Output cap C3Ceramic, ElectrolyticTantalum 22µFstable กับ AMS1117

💬 คำถามที่อาจารย์อาจถาม + คำตอบ

Q1: ทำไมไม่ใช้ ESP32 ที่ทันสมัยกว่า? A: Arduino Nano เพียงพอสำหรับ timing budget (ใช้แค่ 3% ของเวลาต่อพิกเซล) และไม่ต้องการ WiFi/Bluetooth สำหรับ image storage แบบ static

Q2: ทำไมเลือก Royer Converter แทน buck/boost ปกติ? A: Royer เป็น self-oscillating, ไม่ต้องการ MCU/PWM controller, มี ZVS efficiency สูง และเหมาะกับการขับ resonant coil สำหรับ wireless power

Q3: ทำไม 4 แถวไม่ใช่ 2 แถวเหมือนต้นฉบับ? A: เพิ่ม effective scan rate เป็น 4× ทำให้ภาพสว่างขึ้นและกระพริบน้อยลง โดยเฉพาะที่ RPM ต่ำ

Q4: ทำไม PCB coil ไม่ใช้ wire-wound? A: PCB coil ได้ tolerance ดีกว่า, ทำซ้ำได้, ไม่ต้องประกอบ, ราคาเป็นส่วนหนึ่งของ PCB

Q5: balance ที่ 2000 RPM จะมีปัญหาไหม? A: ออกแบบให้สมมาตรกับแกน + มีรูสำหรับน็อตปรับ + LED 4 แถวกระจายช่วย balance อัตโนมัติ


อันนี้คือสรุปทั้งหมดที่คุยกันมา ครอบคลุมทุกการตัดสินใจ พร้อมเหตุผล ตัวเลข และเอกสารอ้างอิงที่อาจารย์มักถาม

ถ้าต้องการให้ผมขยายส่วนไหนเพิ่ม หรือทำเป็น slides PowerPoint บอกได้เลยครับ! 👍

ดีมากครับ Royer coil เป็นส่วนที่อาจารย์น่าจะถามรายละเอียดมาก ผมจะเพิ่มให้ละเอียดและครบทุกเรื่องที่คุยมา


📋 ภาคเพิ่มเติม: Royer Coil System

เอกสารส่วนเสริมสำหรับนำเสนออาจารย์ — โฟกัสที่ระบบ coil ของ Royer Converter


🔍 1. ทำไม Royer ต้องมี Coil 3 ตัว?

Royer Converter ในงาน wireless power ไม่ใช่ขดลวดเดียว แต่ใช้ระบบ 3 coil ทำงานร่วมกัน

text
┌─── ฝั่งฐาน (อยู่นิ่ง) ──────────────────┐
│                                          │
│   ┌─────────────────┐                    │
│   │ L1: Primary     │ ← coil หลัก       │
│   │     Bifilar     │   เป็น LC tank    │
│   │     17 turns    │   + ส่งกำลัง      │
│   └─────────────────┘                    │
│        ║║                                 │
│        ║║ inductive coupling             │
│        ║║                                 │
│   ┌────╨╨─────────┐                      │
│   │ L2: Coupling  │ ← coil เล็ก         │
│   │     6 turns    │   feedback ไป      │
│   │                │   gate MOSFET     │
│   └─────────────────┘                    │
└─────────────╫───────────────────────────┘
              ║
              ║ AIR GAP (~3-5mm)
              ║ → ส่งกำลังที่นี่
              ║
┌─────────────╫───── ฝั่งหมุน ──────────────┐
│   ┌─────────────────┐                     │
│   │ L3: Secondary   │ ← coil รับ        │
│   │     14 turns    │   อยู่บน rotor    │

⚙️ 2. หน้าที่ของแต่ละ Coil (อธิบายละเอียด)

2.1 L1 — Primary Bifilar Coil

หน้าที่ 2 อย่างพร้อมกัน:

  1. เป็นส่วนหนึ่งของ LC Resonant Tank

    • ร่วมกับ capacitor 100nF → สั่นที่ 120 kHz
    • กำหนดความถี่ทำงานของระบบทั้งหมด
  2. ส่งสนามแม่เหล็ก AC

    • ผ่านอากาศไปยัง secondary coil
    • กำลังส่งสูงสุด ~5W

ทำไมต้อง Bifilar (พันลวด 2 เส้นพร้อมกัน)?

  • ได้ 2 ครึ่งที่ coupling กันสมบูรณ์
  • ทำหน้าที่เป็น center-tap transformer
  • ครึ่งซ้าย/ขวาทำงานสลับกัน ตอน MOSFET เปิด/ปิด
text
       ●───────●───────●
        │       │       │  ← Center tap → V+ supply
      Half 1  CT     Half 2
        │       │       │
        ●       │       ●
        │   ↓ MOSFETs ↓ │
        Q1     →     Q2
        │               │
        ●━━━━━━━━━━━━━●
              GND

2.2 L2 — Coupling Coil (Feedback)

หน้าที่: เป็น "ตัวฟัง" สนามแม่เหล็กของ L1 แล้วส่งสัญญาณไปเปิด-ปิด MOSFET

ทำไมต้องมี?

  • Royer เป็น self-oscillating ต้องมี positive feedback
  • L2 จะ induced voltage จาก L1 → ใช้ขับ gate ของ MOSFET
  • ขั้วของ L2 สำคัญที่สุด — ต้องตรงข้ามกับ Q1/Q2 ที่กำลัง on

ขนาดทำไมเล็กกว่า L1 มาก?

  • L2 = ~1/4 ของ L1 (ในแง่ turns)
  • ได้ feedback voltage ที่เหมาะ (5-10V) สำหรับ gate
  • ถ้าใหญ่เกินไป → gate voltage สูงเกิน → MOSFET พัง

2.3 L3 — Secondary Coil (รับพลังงาน)

หน้าที่: รับสนามแม่เหล็กจาก L1 ผ่านช่องอากาศ → จ่ายไฟให้บอร์ดที่หมุน

ขั้นตอน:

text
สนามแม่เหล็ก AC ที่ L1 ──→ L3 induced AC voltage
                              ↓
                         Bridge Rectifier
                              ↓
                         DC + Smoothing
                              ↓
                         AMS1117 → 5V → LED

อัตราส่วน turns กำหนดแรงดัน output:

  • n₂/n₁ × coupling × V_primary = V_secondary
  • ของเรา: 14/17 × 0.4 × 38V ≈ 12V peak → DC 10V → AMS1117 → 5V

🧮 3. การคำนวณค่าตัวเลข

3.1 ความถี่ Resonance

สมการพื้นฐาน: $$f = \frac{1}{2\pi\sqrt{LC}}$$

กำหนดเป้าหมาย:

  • f = 120 kHz (sweet spot ระหว่างขนาด coil กับ loss)
  • C = 100nF (cap film polypropylene หาง่าย)

คำนวณ L ที่ต้องการ: $$L = \frac{1}{(2\pi f)^2 \cdot C} = \frac{1}{(2\pi \times 120{,}000)^2 \times 100 \times 10^{-9}}$$

$$L \approx 17.6 , \mu H$$

→ L1 รวม = 18 µH (จากปลายถึงปลาย)

3.2 คำนวณ Turns ของ Primary (L1)

ใช้ Mohan's Formula สำหรับ planar spiral coil:

$$L = \frac{\mu_0 \cdot n^2 \cdot d_{avg}}{2} \left[ \ln\left(\frac{2.46}{\rho}\right) + 0.20 \cdot \rho^2 \right]$$

ค่าที่กำหนด:

  • d_outer = 90 mm
  • d_inner = 30 mm (เผื่อพื้นที่ L2)
  • d_avg = 60 mm
  • ρ = 0.5 (fill ratio)

คำนวณ: $$L = 6.18 \times 10^{-8} \cdot n^2 , H$$

ต้องการ L = 18 µH: $$n^2 = \frac{18 \times 10^{-6}}{6.18 \times 10^{-8}} = 291$$

→ n ≈ 17 turns (bifilar = trace 2 เส้น × 17 รอบ = 34 trace ทั้งหมด)

3.3 ขนาด Trace ของ L1

พื้นที่ใช้งาน: (90-30)/2 = 30 mm รัศมี

ระยะต่อรอบ: 30/34 = 0.88 mm

แบ่ง:

  • Trace width: 0.4 mm
  • Gap: 0.48 mm

ตรวจสอบ current capacity:

  • กระแส peak ของ primary: ~750 mA
  • Trace 0.4mm × 35µm (1oz) รับได้ ~1.5A ที่ ΔT 10°C ✓

3.4 คำนวณ Turns ของ L2 (Coupling)

กฎทั่วไป: L2 = L1/4 ในแง่ inductance

ค่าที่ใช้:

  • d_outer = 28 mm (ใส่ใน inner ของ L1)
  • d_inner = 10 mm
  • ρ = 0.47

→ n ≈ 6 turns (single, ไม่ bifilar) → L2 ≈ 2-3 µH

Trace:

  • Width: 0.3mm
  • Gap: 0.5mm
  • Layer: single (top)

3.5 คำนวณ Turns ของ L3 (Secondary)

เป้าหมาย: ได้ V_DC ≈ 7-9V (สำหรับ headroom ของ AMS1117)

สมการ: $$V_{secondary,peak} \approx k \cdot \frac{n_2}{n_1} \cdot V_{primary,peak}$$

ค่าที่ใช้:

  • V_primary,peak = π × 12V = 38V (ที่ resonance)
  • k (coupling) = 0.4 (PCB coil + air gap 3-5mm)
  • n₁ = 17 turns
  • ต้องการ V_secondary,peak = 10V

$$\frac{n_2}{n_1} = \frac{10}{38 \times 0.4} = 0.66$$

→ n₂ ≈ 11 turns (เกือบ minimum)

บวก margin เผื่อ coupling แย่กว่าคิด: → n₂ = 14 turns (ปลอดภัย)

Trace: กว้างขึ้น = resistance ต่ำลง

  • Width: 0.8mm
  • Gap: 1.3mm

📐 4. PCB Coil Specifications สุดท้าย

Coilหน้าที่Diameter (Out/In)TurnsTrace WidthGapLayerType
L1 PrimaryPower transmit + LC tank90/30 mm17 × 2 = 340.4 mm0.48 mmTop+Bottom (via)Bifilar
L2 CouplingFeedback to MOSFET gates28/10 mm60.3 mm0.5 mmTop onlySingle
L3 SecondaryPower receive90/30 mm140.8 mm1.3 mmTop+Bottom (via)Single

🔬 5. หลักการ Coupling & Air Gap

5.1 Coupling Coefficient (k)

ค่า k บอกอะไร:

  • k = 1.0 → coupling สมบูรณ์ (เช่น transformer มี core)
  • k = 0.0 → ไม่ coupling เลย
  • PCB coil + air gap 3-5mm: k ≈ 0.3-0.5

ปัจจัยที่กระทบ k:

ปัจจัยผลต่อ k
Air gap น้อยลงk เพิ่ม
Coil diameter ใหญ่ขึ้นk เพิ่ม
Coil aligned ตรงกันk เพิ่ม
Coil shape เหมือนกันk เพิ่ม
Off-centerk ลดลงมาก

5.2 ทำไม Air Gap 3-5mm?

ใหญ่กว่านี้ (>5mm):

  • k ลดลงเร็ว
  • ต้องเพิ่มกำลัง Royer → ร้อน
  • Efficiency ตก

น้อยกว่านี้ (<3mm):

  • กระทบกันได้ตอนหมุน
  • Mechanical tolerance ลำบาก
  • Bearing อาจขยับ

3-5mm = sweet spot สำหรับ:

  • Mechanical safety margin
  • k > 0.4 (efficiency ดี)
  • ไม่ต้องการ precision machining

⚠️ 6. ความท้าทาย & การแก้ปัญหา

6.1 Polarity ของ Coupling Coil

ปัญหา: ถ้า L2 ต่อขั้วผิด → MOSFET ทั้งสองเปิดพร้อมกัน → ลัดวงจร → พังทันที!

วิธีตรวจสอบ:

  1. เปิดไฟครั้งแรกผ่าน current-limited supply (ตั้ง limit 100mA)
  2. หรือใส่ resistor 10Ω อนุกรมที่ V+
  3. ถ้ากระแสกระโดด → ปิดทันที, สลับขั้ว L2
  4. ถ้า oscillate ปกติ → ต่อตรงๆ ได้

6.2 Capacitor ต้องเป็น Film เท่านั้น

ห้าม: ceramic capacitor

เหตุผล:

  • Ceramic 100nF Y5V ที่ AC 38V peak → ค่าลด 50%
  • DC bias effect ทำให้ค่าไม่นิ่ง
  • Ceramic ร้อนเร็วเมื่อทำงานที่ 120 kHz

ใช้: Polypropylene film cap, ≥250V rating

6.3 Tuning หลังประกอบ

ค่า L ที่คำนวณได้อาจ คลาดเคลื่อน ±20% เพราะ:

  • PCB thickness ไม่เท่ากัน
  • Copper thickness ผันแปร
  • Layer alignment

วิธี tune:

  1. วัดความถี่จริงด้วย oscilloscope
  2. ถ้า f สูงกว่าเป้า → เพิ่ม C
  3. ถ้า f ต่ำกว่าเป้า → ลด C

Tip: เริ่มด้วย C = 47nF + 100nF (ขนาน) → 147nF → tune ลงได้

6.4 Air Gap คงที่

ปัญหา: ถ้า rotor กระดิก → coupling กระเพื่อม → output voltage แกว่ง

การแก้:

  • ใช้ standoff/spacer ที่แน่นอน
  • Mounting hole ที่ rotor ตรงกับ bearing
  • ตรวจ wobble ก่อนทดสอบความเร็วสูง

🎨 7. PCB Layout Strategy

7.1 Stack-up

ฐานล่าง (Primary side):

text
Top Layer:    L1 ครึ่งที่ 1 (spiral นอก→ใน) + L2 + Royer driver
              Vias เชื่อมไป Bottom
Bottom Layer: L1 ครึ่งที่ 2 (spiral ใน→นอก) + GND plane

Rotor (Secondary side):

text
Top Layer:    LED + IC + Arduino (rotor topside ↑)
Bottom Layer: L3 + bridge rectifier + power supply + GND plane
              (ด้านที่หันลงเข้าหา primary)

7.2 Spiral Pattern

Square spiral vs Circular spiral:

รูปทรงข้อดีข้อเสีย
Square spiralRouting ง่าย, KiCad nativeInductance ต่ำกว่า circular ~5%
Circular spiralInductance สูงสุดRouting ยาก ต้อง custom angle
Octagonal spiralCompromise ที่ดีค่าระหว่าง 2 แบบ

แนะนำ: Octagonal spiral (8-sided) — KiCad routable ใน 45° mode

7.3 Via Connection

L1 bifilar ต้องใช้ vias เพื่อข้ามตัวเอง:

text
Top layer:    เริ่มขอบนอก →  spiral ใน → via ลง Bottom
Bottom layer: via ขึ้น Top → spiral ออก → ขอบนอก (อีกขั้ว)

Via spec:

  • Size: 0.6 mm drill, 1.0 mm pad
  • Quantity: ~10 vias per coil (กระจายตามจุด crossing)
  • Current rating: 1 via ≈ 1A (สบายสำหรับ 750mA)

🧪 8. การทดสอบ (Testing Plan)

8.1 ทดสอบ Royer (ไม่มี secondary)

Step 1: ต่อแค่ Royer + L1 + L2 (ไม่มี L3 rotor) Step 2: ค่อยๆ เพิ่มไฟจาก 0V → 12V ผ่าน current-limited supply Step 3: วัดที่ L1:

  • ความถี่ ≈ 120 kHz ✓
  • Sinewave shape ✓
  • Peak voltage ≈ 30-40V ✓
  • กระแสจากแหล่งจ่าย ≈ 200-300mA (no load)

ถ้าผิดปกติ:

  • ไม่ oscillate → ตรวจ L2 polarity
  • ความถี่ผิด → ปรับ C
  • MOSFET ร้อน → ตรวจ ZVS timing

8.2 ทดสอบ Coupling (มี L3)

Step 1: วาง rotor PCB เหนือ Royer ที่ air gap 3-5mm Step 2: วัดที่ L3 ด้วย oscilloscope:

  • AC peak ≈ 10-12V ✓
  • ความถี่เดียวกับ L1 ✓ Step 3: ต่อ rectifier + dummy load (resistor 10Ω):
  • V_DC หลัง rectifier ≈ 7-9V ✓
  • Ripple < 200mV ✓

8.3 ทดสอบ Full System

Step 1: ต่อ rotor ทั้งบอร์ด, ยังไม่หมุน Step 2: วัด +5V rail:

  • = 5.0V ± 0.1V ✓
  • กระแสรวม ≈ 400mA ✓ Step 3: ทดสอบ LED ติด/ดับผ่าน Arduino code Step 4: ค่อยหมุนช้าๆ (เริ่มที่ 200 RPM) → เพิ่มความเร็ว Step 5: ที่ 2000 RPM ตรวจ:
  • ภาพ POV ปรากฏชัด
  • Hall sensor trigger ถูกต้อง
  • ไม่มี restart Arduino

🎓 9. คำถามที่อาจารย์อาจถาม + คำตอบ

Q1: ทำไมต้องใช้ Resonant Royer ไม่ใช่ Classic Royer?

A: Classic Royer พึ่ง core saturation → core ร้อน, loss สูง, ใช้กับ ferrite transformer Resonant Royer พึ่ง LC tank → ZVS efficiency 90%+, sinewave (low EMI), เหมาะกับ PCB coil + air-core

Q2: ทำไมไม่ใช้ Qi standard (15W) แทน?

A:

  • Qi ใช้ controller IC ซับซ้อน (BQ51, MP-Q)
  • ต้องการ communication protocol ระหว่าง primary/secondary
  • Overkill สำหรับ 4W static power transfer
  • Royer ง่ายกว่า, ราคาถูกกว่า 10 เท่า

Q3: ทำไมไม่ใช้ ferrite core ใส่ใน coil?

A:

  • Air gap ที่ต้องการ (~5mm) — ferrite core จะ saturate ที่ gap นี้
  • PCB coil + air-core: ทำซ้ำได้, ราคาเป็นส่วนของ PCB
  • Ferrite จะเพิ่มน้ำหนัก, ขนาด, ความซับซ้อน
  • Efficiency ต่างกัน <10% สำหรับ application นี้

Q4: ปัญหา EMI ระดับไหน? FCC compliance?

A:

  • Royer 120 kHz อยู่ใน ISM band ที่ controlled
  • Sinewave (resonant) → harmonics น้อยกว่า square-wave switch
  • Ground pour + shielding → ลด radiated emissions
  • สำหรับ academic project: ไม่ต้อง FCC certified
  • สำหรับ commercial: ต้องเพิ่ม EMI filter + shielding

Q5: ทำไมไม่ใช้ slip ring?

A:

Slip RingWireless (Royer)
ทำให้สึกหรอ (carbon brush)ไม่สึกหรอ
Noise จากการเสียดสีไม่มี contact noise
Mechanical wear → ต้องเปลี่ยนไม่มี wear
ราคาแพง (mini ~500฿+)ราคาเป็นส่วนของ PCB
ความเร็วจำกัดหมุนได้ไม่จำกัด
ต้องการ space ตรงกลางใช้ PCB area เดิม

Q6: ค่า k = 0.4 ดีพอหรือยัง?

A:

  • Industry standard wireless charging: k ≈ 0.5-0.7
  • ของเรา 0.4: efficiency loss ~10% เพิ่มเติม
  • ยอมรับได้ เพราะ:
    • Total efficiency ยัง > 70%
    • กำลังต้องส่งแค่ ~4W (ไม่ใช่ระดับ 100W)
    • Simplicity > efficiency optimization

Q7: ทำไมเลือก 120 kHz ไม่ใช่ 200 kHz หรือ 50 kHz?

A:

  • <50 kHz: Coil ใหญ่เกินไป, ไม่พอดี PCB 120mm
  • >200 kHz: Switching loss สูง, capacitor ESR เริ่มเป็นปัญหา
  • 120 kHz = sweet spot:
    • Coil ขนาดพอดี
    • MOSFET ทั่วไป (IRFZ44N) ทำงานได้ดี
    • Cap film polypropylene หาง่ายที่ค่านี้
    • ตรงกับ RD40 ต้นฉบับ — ผ่านการ verify แล้ว

📚 10. References เพิ่มเติม

  1. Mohan's Formula for PCB Spiral Inductors

    • Mohan, S. S., et al. "Simple accurate expressions for planar spiral inductances." IEEE J. Solid-State Circuits, 1999.
  2. Royer Converter Original Patent

    • US Patent 2783384 (Royer, 1957)
  3. Resonant Royer (Baxandall)

    • Baxandall, P. J. "Transistor sine-wave LC oscillators." Proc. IEEE, 1959.
  4. Wireless Power Transfer Theory

    • Kurs, A., et al. "Wireless power transfer via strongly coupled magnetic resonances." Science, 2007.
  5. RD40 Project Documentation

    • lhm0, Hackaday RD40, 2023

✅ สรุป Royer Coil System

ระบบ Royer coil ของเราใช้แนวคิด 3 coils ทำงานร่วมกัน:

  • L1 Bifilar Primary (17 turns × 2): สร้าง resonance + ส่งกำลัง
  • L2 Coupling (6 turns): feedback ขับ MOSFET
  • L3 Secondary (14 turns): รับกำลังบน rotor

ออกแบบทั้งหมดเป็น PCB spiral coils ผ่านการคำนวณตามทฤษฎี:

  • Mohan's formula → กำหนด turns
  • Resonance equation → กำหนด LC tank
  • Coupling theory → กำหนด air gap & alignment

ทำงานที่ 120 kHz, 4-5W output, efficiency ~70%, k ≈ 0.4 — เหมาะกับ rotor 120mm ที่หมุน 2000 RPM


📖 คำอธิบายประกอบการดู Animation ลองกด Play แล้วดู animation ทำงาน — ผมจะอธิบายสิ่งที่เกิดขึ้นในแต่ละ step ให้ ขั้นที่ 1-4: ครึ่งคลื่นแรก (Positive Half-Cycle) Step 1: Q1 เปิด — MOSFET ตัวซ้าย "เปิดสวิตช์" ทำให้กระแสไหลจาก 12V → choke → L1a (ครึ่งซ้ายของ primary coil) → Q1 → GND Step 2: สนามแม่เหล็กขยายตัว — เมื่อกระแสไหลผ่าน coil → สร้างสนามแม่เหล็ก B ตามกฎ Ampere ขยายออกจาก coil Step 3: L3 รับสนามแม่เหล็ก — สนาม B พุ่งผ่าน air gap → ตัด L3 บน rotor → ตามกฎ Faraday เกิด induced EMF ขั้วบวก Step 4: D1+D4 conduct — แรงดัน AC ครึ่งคลื่นบวก → D1 และ D4 forward biased → กระแสไหลไป V+ output ขั้นที่ 5-8: ครึ่งคลื่นที่สอง (Negative Half-Cycle) Step 5: Q2 เปิด, Q1 ปิด — LC tank "ring" ทำให้ MOSFET สลับกันโดยอัตโนมัติ (self-oscillation) Step 6: B field กลับทิศ — กระแสไหลผ่าน L1b ในทิศตรงข้าม → สนาม B กลับทิศด้วย Step 7: L3 induced AC ขั้วลบ — สนาม B ทิศใหม่ตัด L3 → induced EMF กลับขั้ว Step 8: D2+D3 conduct — แม้ AC กลับขั้ว แต่ bridge rectifier ฉลาด — เลือก D2 และ D3 แทน → กระแสยังไหลไป V+ ทิศเดียวกับครึ่งคลื่นแรก! 🔑 จุดสำคัญที่ต้องเข้าใจ

  1. Self-Oscillation: Royer ไม่ต้องมี clock หรือ microcontroller — LC tank สั่นเองที่ 120 kHz เพราะ resonance
  2. Wireless ผ่าน Magnetic Field: ไม่มีสายไฟข้าม air gap — แค่สนามแม่เหล็กที่สั่นเปลี่ยนทิศ 240,000 ครั้งต่อวินาที (120 kHz × 2)
  3. Full-Wave Rectification: Bridge rectifier ใช้ครึ่งคลื่นทั้งบวกและลบของ AC → จ่ายไฟ DC ออกมาทุกครึ่งคลื่น (efficiency สูง)
  4. LED ติดต่อเนื่อง: ความถี่ 120 kHz เร็วมาก → cap หลัง rectifier กรองให้เป็น DC นิ่ง → LED ติดต่อเนื่องไม่กระพริบ 💡 เปรียบเทียบให้เห็นภาพ ลองนึกถึง:

Royer = หัวใจที่เต้นเอง ไม่ต้องมีสมองสั่ง — pace maker built-in Air gap = ทางเดินของแสง ผ่านอากาศได้ แม้บอร์ดหมุน Bridge rectifier = วาล์วน้ำ บังคับให้ไฟไหลทิศเดียว ไม่ว่า input จะกลับขั้วยังไง

Parts

24
QtyValueFootprintReferences
80.1uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC8, C9, C10, C11, C12, C13, C14, C15
8R_Network08Resistor_THT:R_Array_SIP9RN1, RN2, RN3, RN4, RN5, RN6, RN7, RN8
41N5818Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD3, D68, D69, D70
2220uFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC7, C16
120kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2
1Arduino_Nano_ESP32Module:Arduino_NanoA1

More from Aitthikit/POV_Display_PCB

2
  • 4 layers51.6 × 42.4 mmLED DisplayV2, the printed circuit board in 3D

    LED DisplayV2

    Aitthikit/POV_Display_PCB

    ที่ 2000 RPM: - 33 รอบ/วินาที = 33 FPS - 240 พิกเซลต่อรอบ - 125 µs ต่อพิกเซล

    105 parts
  • 2 layers110 × 110 mmPower and Motor, the printed circuit board in 3D

    Power and Motor

    Aitthikit/POV_Display_PCB

    ที่ 2000 RPM: - 33 รอบ/วินาที = 33 FPS - 240 พิกเซลต่อรอบ - 125 µs ต่อพิกเซล

    25 parts

Similar boards

  • 2 layers56 × 65 mmSeaTalk1, the printed circuit board in 3D

    SeaTalk1

    dotnet/iot

    This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.

    24 parts2.4kMIT
  • 2 layers26.2 × 45.5 mmPL18 multiprotocol, the printed circuit board in 3D

    PL18 multiprotocol

    pascallanger/DIY-Multiprotocol-TX-Module

    Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.

    24 parts1.9kGPL-3.0
  • 2 layers58 × 35.5 mmHat, the printed circuit board in 3D

    Hat

    menloresearch/asimov-1

    v1 of Asimov, an open-source humanoid robot

    24 parts1.4kCERN-OHL-S-2.0
  • 2 layers21.6 × 19.5 mmMicron Logo LED, the printed circuit board in 3D

    Micron Logo LED

    DraftShift/StealthChanger

    Tool changing system for Vorons and other front mount printer motion systems, not just stealthburner.

    24 parts1.2kGPL-3.0
  • 2 layers158 × 11 mmRainbow Matchstick, the printed circuit board in 3D

    Rainbow Matchstick

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    24 parts1.1kGPL-3.0
  • 2 layers85.6 × 54 mmTRACED wio1262-carrier, the printed circuit board in 3D

    TRACED wio1262-carrier

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    24 parts915
  • 2 layers36 × 20 mmCombined, the printed circuit board in 3D

    Combined

    adamb314/ServoProject

    Getting the most out of your hobby servo

    24 parts545

Questions

What parts does the POV PCBv1 use?

24 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the POV PCBv1 KiCad files?

From the Aitthikit/POV_Display_PCB repository on GitHub, at the commit this page was made from: the board is LED_Display/POV_PCBv1.kicad_pcb and its schematic LED_Display/LED.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the POV PCBv1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Aitthikit before reusing the design.