Skip to the content
2 layers79.8 × 38.4 mmAmpflicador-3out v2, the printed circuit board in 3D

Ampflicador-3out v2

Aid-Code/LesSilent-Guitar

LesSilent is an electric silent guitar project in which you will be able to use the guitar in 3 different modes: - Silent. Connect your headphones and start playing. - Out loud. Change to the built-in speaker. - Amplifier/sound interface. Connect the guitar through a 6.5 mm cable.

Size
79.8 × 38.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
38
Nets
24
Pads
84
Tracks, vias
199, 2
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
3 Apr 2024
Updated
17 Oct 2025

Overview

Ampflicador-3out v2 is an open-source printed circuit board by Aid-Code, from the Aid-Code/LesSilent-Guitar repository on GitHub. It is a 2-layer board of 79.8 × 38.4 mm with 38 parts on 24 nets, routed with 199 tracks and 2 vias.

It is built around the LM386. Its parts include 12 capacitors, 7 resistors, 4 connectors, 2 switches and 1 IC. It belongs with the audio and music boards of this library.

Main components

1

Parts

38
QtyValueFootprintReferences
4, , ,
30,1µFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC1, C3, C7
2100µFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC2, C11
210µFCapacitor_THT:CP_Radial_D4.0mm_P1.50mmC5, C6
210ΩResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR2, R6
2Piezo 2Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_VerticalP2, P3
10,1µFCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC10
11,2kΩResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR5
11000µFCapacitor_THT:CP_Radial_Tantal_D9.0mm_P5.00mmC9
110KΩResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1
110MΩResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR3
133nFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC8
14,7µFCapacitor_THT:CP_Radial_D4.0mm_P1.50mmC12
1430ΩResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR7
1470pFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC4
1470ΩResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR4
1AudioJack2_Ground_SwitchConnector_Molex:Molex_KK-254_AE-6410-05A_1x05_P2.54mm_VerticalOutput-Jack-3.5
1BassConnector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_VerticalRV3
1GainConnector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_VerticalRV2
1Jack 6.5Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_VerticalJ1
1LEDConnector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_VerticalD1
1LM386Package_DIP:DIP-8_W7.62mm_LongPadsU1
1MPF102Package_TO_SOT_THT:TO-92Q1
1Piezo 1Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_VerticalP1
1Power InputConnector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_VerticalBT1
1SW_DPST_x2Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_VerticalSW1
1SW_DPST_x2Button_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2QSW2
1SpeakerConnector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_VerticalLS1
1VolumeConnector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_VerticalRV1

More from Aid-Code/LesSilent-Guitar

2
  • 2 layersAmplificador-3out v3-SMD, the printed circuit board in 3D

    Amplificador-3out v3-SMD

    Aid-Code/LesSilent-Guitar

    LesSilent is an electric silent guitar project in which you will be able to use the guitar in 3 different modes: - Silent. Connect your headphones and start playing. - Out loud. Change to the built-in speaker.

    31 parts
  • 2 layersAmpflicador-3out v1, the printed circuit board in 3D

    Ampflicador-3out v1

    Aid-Code/LesSilent-Guitar

    LesSilent is an electric silent guitar project in which you will be able to use the guitar in 3 different modes: - Silent. Connect your headphones and start playing. - Out loud. Change to the built-in speaker.

    24 parts

Similar boards

  • 2 layers152 × 88 mmRFBitBangSMT, the printed circuit board in 3D

    RFBitBangSMT

    profdc9/RFBitBanger

    A QRP digital transceiver created from readily available parts for off-the-grid maintenance

    271 parts222
  • 2 layers90 × 140 mmDrumkid, the printed circuit board in 3D

    Drumkid

    mattybrad/drumkid

    Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.

    70 parts137
  • 2 layersLM80C R6, the printed circuit board in 3D

    LM80C R6

    leomil72/LM80C

    A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

    153 parts123GPL-3.0
  • 2 layers145.3 × 44.5 mmScout, the printed circuit board in 3D

    Scout

    oskitone/scout

    3D-printed, Arduino-compatible, 17-key mono synth. Squeeeee!

    48 parts114
  • 2 layers184 × 114.8 mmPoly555, the printed circuit board in 3D

    Poly555

    oskitone/poly555

    The POLY555 is a polyphonic, analog, square wave synth based on the 555 timer chip.

    262 parts93
  • 4 layers223.3 × 120.1 mmISA FPGA v2, the printed circuit board in 3D

    ISA FPGA v2

    robfinch/Cores

    Cores ===== RTF's Cores Use at your own risk. Welcome to my galaxy of cores. Contained in the directories are IP cores, source code for digital circuits.

    132 parts78
  • 2 layers101.6 × 137.4 mmOpenxcvr, the printed circuit board in 3D

    Openxcvr

    dawsonjon/OpenXcvr

    Cost Effective HF transceiver based on max1000 FPGA module

    155 parts38MIT
  • 2 layers104.1 × 73.7 mmIsa opl2, the printed circuit board in 3D

    Isa opl2

    skiselev/isa-opl2

    ISA OPL2 Card

    61 parts36

Questions

How big is the Ampflicador-3out v2 PCB?

It measures 79.8 × 38.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ampflicador-3out v2 use?

38 parts, built around the LM386. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ampflicador-3out v2 KiCad files?

From the Aid-Code/LesSilent-Guitar repository on GitHub, at the commit this page was made from: the board is Electronica/Ampflicador-3out-v2/Ampflicador-3out-v2.kicad_pcb and its schematic Electronica/Ampflicador-3out-v1/Ampflicador-3out-v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ampflicador-3out v2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Aid-Code before reusing the design.