
OSO SWAT C1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

This PCB is used to connect all Electrical signals and power in UAV Project.
LL PCB is an open-source printed circuit board by Ahmed-Elnafadi, from the Ahmed-Elnafadi/GP-PCB repository on GitHub. It is a 2-layer board of 63.5 × 71.1 mm with 28 parts on 31 nets, routed with 191 tracks and 16 vias.
It belongs with the STM32 boards of this library.
This PCB is used to connect all Electrical signals and power in UAV Project.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | ~ | Buck_Converter:mini_360 | Buck, Buck 2 |
| 1 | +12V Input | PWR:PWR_Pad | J4 |
| 1 | +5V Input | PWR:PWR_Pad | J3 |
| 1 | Beagle PWR | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | BBB PWR |
| 1 | ESC-Device | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | ESCD |
| 1 | JST 2.5mm GPS Module | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Horizontal | GPS Module |
| 1 | JST-SH 1mm GPS-BBB | Connector_JST:JST_SH_BM06B-SRSS-TB_1x06-1MP_P1.00mm_Vertical | GPS BBB |
| 1 | LOGO | UAV:UAV | G*** |
| 1 | LOGO | UAV:BBB | G*** |
| 1 | LOGO | UAV:Mavlink | G*** |
| 1 | Raspberry PWR | Connector_BarrelJack:BarrelJack_Horizontal | Rasp PWR |
| 1 | SPI_BBB | Connector_JST:JST_SH_BM06B-SRSS-TB_1x06-1MP_P1.00mm_Vertical | SPI_BBB |
| 1 | SPI_MCP2515 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | SPI_MCP2515 |
| 1 | STM32-ESC-SIGNAL | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | ESC |
| 1 | Servo-Annulus-Left | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | SAL |
| 1 | Servo-Annulus-Right | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | SAR |
| 1 | Servo-Elevator-Left | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | SEL |
| 1 | Servo-Elevator-Right | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | SER |
| 1 | Servo-GND-IN | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | Servo GND |
| 1 | Servo-Payload | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | SPayload |
| 1 | Servo-Rudder-Vertical | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | SRV |
| 1 | Servo-Signals-IN | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | Servo Signals |
| 1 | TEL-BBB JST-SH 1mm | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | TEL BBB |
| 1 | TEL-Device | Connector_JST:JST_GH_BM06B-GHS-TBT_1x06-1MP_P1.25mm_Vertical | TEL Device |
The 25 most common of 28 parts.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

asterics/esp32_mouse_keyboard
ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)


Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
It measures 63.5 × 71.1 mm and has 2 copper layers, 1.6 mm thick.
28 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Ahmed-Elnafadi/GP-PCB repository on GitHub, at the commit this page was made from: the board is LL PCB.kicad_pcb and its schematic LL PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Ahmed-Elnafadi before reusing the design.