2 layers50.8 × 20.3 mm
2 layers38.1 × 20.3 mm
Pmod rfid
Agilack/pmod10This repository holds multiple PMOD modules projects
- Size
- 38.1 × 20.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 31
- Pads
- 107
- Tracks, vias
- 297, 35
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 27 Jun 2017
- Updated
- 4 Sep 2019
Overview
Pmod rfid is an open-source printed circuit board by Agilack, from the Agilack/pmod repository on GitHub. It is a 2-layer board of 38.1 × 20.3 mm with 34 parts on 31 nets, routed with 297 tracks and 35 vias.
Its parts include 19 capacitors, 3 resistors, 3 inductors, 2 connectors and 1 IC. It belongs with the radio and wireless boards of this library.
README
README.mdPMOD modules
This repository contains multiple projects of PMOD modules. All of them are used for communications.
CAN
This module is a peripheral interface to connect a CAN bus.
RS232
This module is a RS232 interface. The PMOD side is a type4a interface and the other side is a DB9 male connector. The module contains a level shifter (basically a MAX3232) to allow interfacing RS232 signal levels on a board with TTL levels.
RS485
Midi (IN)
This module can be used to connect a MIDI device to a board with PMOD interface. The MIDI port is an input, so only instruments that send datas can be connected (tested with a keyboard)
USB Serial
This module is an usb-serial adapter (PMOD peripheral). Based on a Silicon Labs chip, no specific driver is required to use it on most OS.
Wifi
This module is a Wifi interface (PMOD peripheral). Based on the very popular espressif chip (ESP8285 or ESP8266)
License
All electronics parts are released under Creative Commons Attribution Share Alike 3.0 license.
All firmwares and softwares included with modules are realeased under GNU General Public Licence v3 (GNU GPLv3)
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10nF | pmod-rfid:SMD0603 | C12, C14, C16 |
| 3 | 2,2uF | pmod-rfid:SMD0603 | C11, C13, C15 |
| 3 | CONN_1 | pmod-rfid:TP_SMD | TP1, TP2, TP3 |
| 2 | 0 | pmod-rfid:SMD0402 | R2, R3 |
| 2 | 1,2nF | pmod-rfid:SMD0603 | C3, C4 |
| 2 | 1,5nF | pmod-rfid:SMD0603 | C1, C2 |
| 2 | 100nF | pmod-rfid:SMD0603 | C18, C19 |
| 2 | 680pF | pmod-rfid:SMD0603 | C5, C8 |
| 1 | 100pF | pmod-rfid:SMD0603 | C9 |
| 1 | 10k | pmod-rfid:SMD0603 | R1 |
| 1 | 10pF | pmod-rfid:SMD0603 | C6 |
| 1 | 13,56MHz | pmod-rfid:Q_SMD5x3 | X1 |
| 1 | 220pF | pmod-rfid:SMD0603 | C7 |
| 1 | 27pF | pmod-rfid:SMD0603 | C10 |
| 1 | 330nH | pmod-rfid:I_1008CS | L2 |
| 1 | 450px | pmod-rfid:logo-agilack-11.5 | agilack-11.5 |
| 1 | ANTENNA | pmod-rfid:CONN_SMA_RA | P2 |
| 1 | C | pmod-rfid:SMD0805 | C20 |
| 1 | FB1000 | pmod-rfid:SMD0603 | L3 |
| 1 | INDUCTOR | pmod-rfid:I_1008CS | L1 |
| 1 | PMOD | pmod-rfid:CONN_PMOD-Male | P1 |
| 1 | TRF7970 | pmod-rfid:QFN32 | U1 |
| 1 | VAL** | pmod-rfid:logo-ohw | ohw_logo |
More from Agilack/pmod
9- 2 layers38.1 × 20.3 mm
- 4 layers38.1 × 20.3 mm
- 2 layers50.8 × 21 mm
- 2 layers50.8 × 20.3 mm
- 2 layers38.1 × 20.3 mm
- 2 layers50.8 × 20.3 mm
- 2 layers50.8 × 20.3 mm
- 2 layers38.1 × 20.3 mm
Similar boards
- 2 layers142.5 × 106.4 mm
- 2 layers26 × 30 mm
Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 2 layers171.2 × 72.9 mm
Amiga gfxcard old
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
34 parts1k - 2 layers53.5 × 62.5 mm
Led matrix
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
34 parts915 - 2 layers45 × 26 mm
- 2 layers41.7 × 25.7 mm
Headphones flex pcb rigid
strangeparts/niubi-headphones
Flexible circuit board design for adding a headphone jack to an iPhone 7
34 parts493MIT - 2 layers18.8 × 16.3 mm
- 2 layers127 × 69.9 mm
Ezcgi
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.
34 parts446
Questions
How big is the Pmod rfid PCB?
It measures 38.1 × 20.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pmod rfid use?
34 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pmod rfid KiCad files?
From the Agilack/pmod repository on GitHub, at the commit this page was made from: the board is rf-rfid/prj-kicad/pmod-rfid.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pmod rfid design in my own project?
Its repository states no licence, so its author keeps all rights: ask Agilack before reusing the design.