Skip to the content
2 layers44 × 44 mmGPS Puck, the printed circuit board in 3D

Venus based GPS serial GPS puck

Size
44 × 44 mm
Copper layers
2
Thickness
1.6 mm
Parts
43
Nets
31
Pads
179
Tracks, vias
139, 7
Routed
Yes
KiCad
KiCad 4
Created
1 Jan 2015
Updated
6 Jan 2015

Overview

GPS Puck is an open-source printed circuit board by AerodyneLabs, from the AerodyneLabs/GPS-Puck repository on GitHub. It is a 2-layer board of 44 × 44 mm with 43 parts on 31 nets, routed with 139 tracks and 7 vias.

It is built around the NCP1521BSN, 74HC2G86DP and BSS138. Its parts include 13 capacitors, 13 resistors, 4 ICs, 3 inductors and 2 transistors. It belongs with the radio and wireless boards of this library.

Main components

3

README

README.md

GPS-Puck

Venus based GPS serial GPS puck

Parts

43
QtyValueFootprintReferences
833kResistors:RESC1608NR1, R8, R9, R10, R11, R12, R13, R14
61uFCapacitors:CAPC1608NC1, C2, C6, C7, C10, C13
3INVCustom:SB1608NSB1, SB2, SB3
2BSS138SOT:SOT95P240-3N-GSDQ1, Q2
10.01uFCapacitors:CAPC1608NC3
1100kResistors:RESC1608NR6
110uFCapacitors:CAPC2012NC12
1180Resistors:RESC1608NR2
118pFCapacitors:CAPC1608NC11
12.2nHInductors:INDC1608NL2
12.2uHInductors:INDC2012NL3
122nFCapacitors:CAPC1608NC8
122pFCapacitors:CAPC1608NC5
13.6pFCapacitors:CAPC1608NC4
1390Resistors:RESC1608NR4
13VBatteries:Battery_ML-1220-F1ANB1
14.7kResistors:RESC1608NR3
14.7uFCapacitors:CAPC1608NC9
1453kResistors:RESC1608NR5
174HC2G86SOP:SOP65P400-8NU4
18.2nHInductors:INDC1608NL1
1AntennaCustom:Antenna_APAE1575R1840BADB1FAE1
1BoardBoards:Board_Hammond-1551RFLBoard_Hammond-1551RFL
1Conn-9Connectors:Conn_9-Wire-PadsJ1
1NCP1521SOT:SOT95P275-5L40NU3
1RB521Diodes:SODFL1608ND1
1SKY65047-360LFSON:SON50P200X200-9T100X180NU2
1Venus838LPx-LCustom:Sensor_Venus838U1

Similar boards

  • 2 layers75.7 × 80.9 mmNocodephprobe, the printed circuit board in 3D

    Nocodephprobe

    cristoper/nocodephmeter

    A pH meter for use with inexpensive pH probes (for gardening, home experiments) with temperature compensation and digital readout but no microcontroller

    52 parts3MIT
  • 2 layers85 × 54 mmAether, the printed circuit board in 3D

    Aether

    AerodyneLabs/Aether

    High-altitude balloon pico-tracker

    82 parts2
  • 4 layers36 × 50.2 mmRacer, the printed circuit board in 3D

    Racer

    StuckAtPrototype/Racer

    These are structured into their own files. I could have used submodules, but decided against it.

    83 parts3.8kApache-2.0
  • 4 layers95 × 95 mmCube motherboard, the printed circuit board in 3D

    Cube motherboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    52 parts1.1kGPL-3.0
  • 2 layers54.6 × 70.9 mmBeagleLogic Cape, the printed circuit board in 3D

    BeagleLogic Cape

    abhishek-kakkar/BeagleLogic

    A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.

    22 parts479GPL-3.0
  • 2 layers44.2 × 29.3 mmI2c tiny usb, the printed circuit board in 3D

    I2c tiny usb

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    27 parts454
  • 2 layers21.6 × 52.3 mmPs2 pico hat, the printed circuit board in 3D

    Ps2 pico hat

    No0ne/ps2x2pico

    USB keyboard/mouse to PS/2 interface converter using a Raspberry Pi Pico

    17 parts399MIT

Questions

How big is the GPS Puck PCB?

It measures 44 × 44 mm and has 2 copper layers, 1.6 mm thick.

What parts does the GPS Puck use?

43 parts, built around the NCP1521BSN, 74HC2G86DP and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the GPS Puck KiCad files?

From the AerodyneLabs/GPS-Puck repository on GitHub, at the commit this page was made from: the board is Hardware/GPS-Puck.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the GPS Puck design in my own project?

Its repository states no licence, so its author keeps all rights: ask AerodyneLabs before reusing the design.