2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
36 parts1kGPL-3.0
2 layers124.5 × 86.4 mm
RCTransmitterAecertRobotics
Aecert-Robotics/Arduino-RC-Transmitter21Arduino Mega Pro powered RC Transmitter using the NRF24L01+ chip
- Size
- 124.5 × 86.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 92
- Pads
- 209
- Tracks, vias
- 454, 93
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 24 Nov 2024
- Updated
- 22 Apr 2025
Overview
RCTransmitterAecertRobotics is an open-source printed circuit board by Aecert-Robotics, from the Aecert-Robotics/Arduino-RC-Transmitter repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 124.5 × 86.4 mm with 36 parts on 92 nets, routed with 454 tracks and 93 vias.
Its parts include 4 resistors and 2 capacitors.
README
README.mdArduino-RC-Transmitter
Arduino Mega Pro powered RC Transmitter using the NRF24L01+ chip
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3 | H5, H6, H7, H8, H9, H10 |
| 4 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 4 | SW_DIP_x01 | AddedFootprints:SPST Mini Toggle Switch 2 Pin 2 Position | Toggle1, Toggle2, Toggle3, Toggle4 |
| 2 | 10k | Potentiometer_THT:Potentiometer_Bourns_PTV09A-1_Single_Vertical | Pot1, Pot2 |
| 2 | 10uf | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C2 |
| 1 | 1.27mm_JST_Connector_1 | AddedFootprints:JST Female Connector | Battery1 |
| 1 | Arduino Mega Pro Mini | AddedFootprints:Arduino Mega Pro | Arduino_Mega_Pro1 |
| 1 | EC11E | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | Rotary_Encoder1 |
| 1 | KCD1 Power Switch | AddedFootprints:KCD1 Mini Rocker Switch | PowerSwitch1 |
| 1 | LOGO | LOGO | G*** |
| 1 | MPU6050 Gyroscope | AddedFootprints:MPU6050 Gyroscope | Gyroscope1 |
| 1 | NRF24L01+PA+LNA1 | AddedFootprints:NRF24L01+ Antenna | NRF24L01+PA+LNA1 |
| 1 | SSD1309 2.4inch | AddedFootprints:OLED LCD Display SSD1309 | OLED_LCD_Display1 |
| 1 | SW_Push A | Button_Switch_THT:SW_PUSH_6mm | Button1 |
| 1 | SW_Push B | Button_Switch_THT:SW_PUSH_6mm | Button2 |
| 1 | SW_Push C | Button_Switch_THT:SW_PUSH_6mm | Button3 |
| 1 | SW_Push D | Button_Switch_THT:SW_PUSH_6mm | Button4 |
| 1 | SW_Push Left Bumper A | AddedFootprints:Bumper Pads | Bumper1 |
| 1 | SW_Push Left Bumper B | AddedFootprints:Bumper Pads | Bumper2 |
| 1 | SW_Push Right Bumper A | AddedFootprints:Bumper Pads | Bumper3 |
| 1 | SW_Push Right Bumper B | AddedFootprints:Bumper Pads | Bumper4 |
| 1 | THB001P Joy Left | AddedFootprints:THB001P | Joystick1 |
| 1 | THB001P Joy Right | AddedFootprints:THB001P | Joystick2 |
Similar boards
- 2 layers55 × 70 mm
Arduino v1
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
36 parts915 - 2 layers50.4 × 24.8 mm
- 2 layers45.7 × 31.8 mm
LEDx16 board
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
36 parts803MIT - 2 layers32 × 24 mm
- 2 layers69 × 53.8 mm
TUSS4470 shield
Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.
36 parts530 - 2 layers99.1 × 53.3 mm
- 2 layers16.1 × 119 mm
Questions
How big is the RCTransmitterAecertRobotics PCB?
It measures 124.5 × 86.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RCTransmitterAecertRobotics use?
36 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RCTransmitterAecertRobotics KiCad files?
From the Aecert-Robotics/Arduino-RC-Transmitter repository on GitHub, at the commit this page was made from: the board is PCB/RCTransmitterAecertRobotics.kicad_pcb and its schematic PCB/RCTransmitterAecertRobotics.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RCTransmitterAecertRobotics design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).