Skip to the content
2 layers59.5 × 86.5 mmRequiemTone, the printed circuit board in 3D

RequiemTone is a small electronic instrument that lets you play notes, make little melodies, and create retro video-game sounds.

Size
59.5 × 86.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
33
Pads
134
Tracks, vias
182, 14
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
24 Oct 2026
Updated
25 Oct 2026

Overview

RequiemTone is an open-source printed circuit board by Adityachavhan339, from the Adityachavhan339/RequiemTone repository on GitHub. It is a 2-layer board of 59.5 × 86.5 mm with 17 parts on 33 nets, routed with 182 tracks and 14 vias.

Its parts include 8 switches, 1 resistor and 1 connector. It belongs with the audio and music boards and the RP2040 boards of this library.

README

README.md

RequiemTone

RequiemTone is a small electronic instrument that lets you play notes, make little melodies, and create retro video-game sounds. The idea is to create a simple electronic instrument with eight buttons, two knobs, and a piezo sounder.

The Parts I Am Using:

text
-8 physical buttons for playing notes or triggering sounds
-2 potentiometers for adjusting sound parameters
-Piezo sound output
-USB-powered Raspberry Pi Pico
-Custom-designed PCB
-Planned custom firmware for generating sounds and melodies

What Its Gonna Do: The Raspberry Pi Pico reads all buttons as digital inputs and the two potentiometers as analog inputs. The firmware will use these inputs to generate sound through the piezo sounder. The buttons will be programmed to play different notes, while the potentiometers can control parameters such as tempo and pitch.

Why I made it:

Well as always couldn't find better idea and because halfway i found out Mp3 player is not considered an instrument😅.

Schematic Image:

Screenshot_20261025_193828

PCB Image:

Screenshot_20261025_193036

CAD Images:

Screenshot_20261025_193300 Screenshot_20261025_193249 Screenshot_20261025_193241 Screenshot_20261025_193212

( I Am Still Writing Firmware i have no idea how still looking at it and i don't know what else to write in readme so that's it for now thanks i will keep updating it in future)

AI Disclosure

Well I Heard Somewhere AI Is Shit With hardware and i experienced it firsthand it sucks in this so i did it all by myself

Parts

17
QtyValueFootprintReferences
210kPotentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_VerticalRV1, RV2
1100Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1KEY1Button_Switch_THT:SW_PUSH_6mmSW1
1KEY2Button_Switch_THT:SW_PUSH_6mmSW2
1KEY3Button_Switch_THT:SW_PUSH_6mmSW3
1KEY4Button_Switch_THT:SW_PUSH_6mmSW4
1KEY5Button_Switch_THT:SW_PUSH_6mmSW5
1KEY6Button_Switch_THT:SW_PUSH_6mmSW6
1KEY7Button_Switch_THT:SW_PUSH_6mmSW7
1KEY8Button_Switch_THT:SW_PUSH_6mmSW8
1PIEZOConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1
1RaspberryPi_PicoModule:RaspberryPi_Pico_Common_SMDA1

The 13 most common of 17 parts.

Similar boards

  • 2 layers50 × 35 mmServo power, the printed circuit board in 3D

    Servo power

    earthtojake/text-to-cad

    Design physical products with AI

    17 parts26kMIT
  • 2 layers139.7 × 62.2 mmBreakout 60pin EEC IV, the printed circuit board in 3D

    Breakout 60pin EEC IV

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    17 parts1.2k
  • 2 layers29.2 × 55.9 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    17 parts1kGPL-3.0
  • 2 layers24.5 × 36.5 mmCluster, the printed circuit board in 3D

    Cluster

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    17 parts993
  • 2 layers56.3 × 55.7 mmStarNecklace, the printed circuit board in 3D

    StarNecklace

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    17 parts915
  • 2 layers25 × 25 mmSmallEncoder, the printed circuit board in 3D

    SmallEncoder

    DDeGonge/OS-ARM

    This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…

    17 parts498MIT
  • 2 layers38.9 × 16.1 mmAmoeba spc, the printed circuit board in 3D

    Amoeba spc

    mtl/keyboard-pcbs

    Keyboard PCBs

    17 parts485
  • 2 layers36 × 51 mmABSIS ALE, the printed circuit board in 3D

    ABSIS ALE

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    17 parts431

Questions

How big is the RequiemTone PCB?

It measures 59.5 × 86.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the RequiemTone use?

17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RequiemTone KiCad files?

From the Adityachavhan339/RequiemTone repository on GitHub, at the commit this page was made from: the board is Schematic/RequiemTone.kicad_pcb and its schematic Schematic/RequiemTone.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the RequiemTone design in my own project?

Its repository states no licence, so its author keeps all rights: ask Adityachavhan339 before reusing the design.