2 layers130.2 × 94 mm
2 layers130.2 × 94 mm
Codepo 2ème plaque
AdelStudent/Codepo_22_23- Size
- 130.2 × 94 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 142
- Pads
- 401
- Tracks, vias
- 198, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 27 Mar 2023
- Updated
- 31 Jul 2023
Overview
Codepo 2ème plaque is an open-source printed circuit board by AdelStudent, from the AdelStudent/Codepo_22_23 repository on GitHub. It is a 2-layer board of 130.2 × 94 mm with 65 parts on 142 nets, routed with 198 tracks and 0 vias.
It is built around the ESP32-S2-SAOLA-1RI, TMUX4051PWRQ1 and 35RAPC4BH3. Its parts include 20 resistors, 18 diodes, 15 connectors, 5 ICs and 3 capacitors. It belongs with the ESP32 boards of this library.
Main components
3ESP32-S2-SAOLA-1RI
-Support USB interface、Mesh networking - WiFi Modules ROHSEspressif SystemsWiFi Modules
TMUX4051PWRQ1
TSSOP-16-12V~12V、5V~24V -40℃~+125℃ 1 1.05kΩ 160ns 190ns 20ns 280MHz 8:1 TSSOP-16 Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
35RAPC4BH3
插件,6x14mm3.5mm Headphone Jack Copper alloy Silver 插件,6x14mm Audio Connectors ROHSSwitchcraftAudio Connectors (Headphones)
README
README.mdContents
main: Code for Arduinoesp32_easy: Code for ESP32PCD codepo: Used to share progress on the PCBReport_final: Used for writing monthly reports (code to transfer to Arduino)projet codepo: Used for reading different sensors (code to transfer to Arduino)PythonTest: Code permettant de vérifier l'envoie de message via le broker ThingstreamModélisation Congo: Modèle permettant de prédire la consommation en énergie de la cameskinData Type Cameskin: Dossier que la CAMESKIN nous a partagé afin comparer si nos moyens de communiquer la data est pertinante
Voici quelques commandes git utiles:
Download the project
Update a downloaded code
- git status
- git pull
Commit a new code!!
- git add .
- git commit -a -m "Update Message"
- git push
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | D_Schottky | schottky:SODFL2513X70N | D1, D2, D11, D12, D13, D14, D15, D16, D17, D18 |
| 8 | D_Zener | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3, D4, D5, D6, D7, D8, D9, D10 |
| 7 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J1, J3, J4, J4, J5, J6, J9 |
| 6 | 910Kohm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R3, R10, R10, R11, R11 |
| 4 | 10kohm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8, R8, R9 |
| 3 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J7, J8 |
| 2 | 0.1uF | Capacitor_SMD:CP_Elec_3x5.3 | C1, C2 |
| 2 | 270kohm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R2 |
| 2 | 300kohm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R6 |
| 2 | 450kohm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R4 |
| 2 | 910 kohms | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R5 |
| 2 | 910kohm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R1 |
| 2 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3, J5 |
| 2 | DUE | A000062 (2):MODULE_A000062 | Arduino1, Arduino1 |
| 2 | OPA182IDBVR | OPA182IDBVR:SOT95P280X145-5N | IC1, IC3 |
| 2 | Thermistor_NTC | thermistor ntc:B57364S0300M000 | TH1, TH1 |
| 1 | 100 uF | Capacitor_SMD:CP_Elec_3x5.3 | C1 |
| 1 | 35RAPC4BH3 | 35RAPC4BH3:35RAPC4BH3 | J1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J10 |
| 1 | ESP32-S2-Saola-1RI | ESP32-S2-Saola-1RI:ESP32S2Saola1RI | IC3 |
| 1 | TMUX4051PWR | TMUX:SOP65P640X120-16N | IC2 |
| 1 | TMUX4051PWR | TMUX4051PWR:SOP65P640X120-16N | IC2 |
More from AdelStudent/Codepo_22_23
3- 2 layers
- 2 layers
Similar boards
- 2 layers106.3 × 128.5 mm
- 2 layers99.5 × 109.9 mm
PSU
velvia-fifty/AudioThings
DIY audio-related projects of questionable quality and dubious utility; delivered in 30 minutes or less or the next one is free
53 parts1 - 2 layers77.2 × 69.8 mm
- 2 layers70 × 70 mm
Fwrtss
ynsta/fwrtss
Open source hardware and software project of a regulated soldering station for RT soldering tips
103 parts7 - 2 layers53.3 × 32.4 mm
Backporch
semi-simple/backporch
Classic gaming consoles to SCART/PVM/OSSC/RetroTINK adapter
31 parts6Apache-2.0 - 2 layers110 × 62 mm
- 2 layers50 × 50 mm
EMG Karti
edanurfidan61/ad8232-emg-esp32
Building an educational EMG setup with AD8232 and ESP32/ AD8232 ve ESP32 ile öğretici amaçlı emg yapımı
25 parts1 - 2 layers100.9 × 61.8 mm
SplitAudio
daugihao/mm-crossed-audio
Midnight Madness 2018 - PCB to send left and right audio channels to different earphones
6 parts
Questions
How big is the Codepo 2ème plaque PCB?
It measures 130.2 × 94 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Codepo 2ème plaque use?
65 parts, built around the ESP32-S2-SAOLA-1RI, TMUX4051PWRQ1 and 35RAPC4BH3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Codepo 2ème plaque KiCad files?
From the AdelStudent/Codepo_22_23 repository on GitHub, at the commit this page was made from: the board is PCB codepo/codepo 2ème plaque/codepo 2ème plaque/codepo 2ème plaque.kicad_pcb and its schematic PCB codepo/PROJET CODEPO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Codepo 2ème plaque design in my own project?
Its repository states no licence, so its author keeps all rights: ask AdelStudent before reusing the design.