4 layers54 × 64 mm
2 layers85.6 × 54 mm
Ragnohacks PCB
AdamTuraj/Ragnohacks-PCB1This is the repo containing the design files for the PCB which may be used in the Ragnohacks hackathon
- Size
- 85.6 × 54 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 57
- Pads
- 206
- Tracks, vias
- 429, 37
- Pours
- 38
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 28 Aug 2024
- Updated
- 10 Mar 2026
Overview
Ragnohacks PCB is an open-source printed circuit board by AdamTuraj, from the AdamTuraj/Ragnohacks-PCB repository on GitHub. It is a 2-layer board of 85.6 × 54 mm with 38 parts on 57 nets, routed with 429 tracks and 37 vias.
It is built around the SC0914(13), W25Q128JVSIQ and LD1117S33TR(MS), with the USBLC6-2P6, PPPC181LGBN-RC and 150060GS75000 among its other parts. Its parts include 18 capacitors, 6 resistors, 5 connectors, 4 ICs and 3 diodes. It belongs with the RP2040 boards of this library.
Main components
9SC0914(13)
QFN-56(7x7)-40℃~+85℃@(TC) 1.8V~3.3V 12bit 133MHz 264KB 30 32 Bit ARM Cortex-M0+ Built-in+External External QFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
LD1117S33TR(MS)
SOT-223-20℃~+125℃@(Ta) 1 1.4V@(1A) 12V 1A 2mA 3.3V Fixed Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMSKSEMIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
USBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)PPPC181LGBN-RC
弯插,P=2.54mmFemale HeadersSullins Connector Solutions
150060GS75000
0603-40℃~+85℃ 140° 20mA 3.2V 430mcd 515nm 525nm Discrete Diode Green Water Clear 0603 LED Indication - Discrete ROHSWürth ElektronikLED Indication - Discrete
RH100-12.000-12-1010-X-TR-NS2
SMD3225-4PCrystalsRaltron10129379-902002BLF
弯插,P=2.54mm-55℃~+105℃ 1 110V 2.29mm 2.41mm 2.54mm 2P 3A 5.84mm Black Copper alloy Pin Header Right Angle 弯插,P=2.54mm Pin Headers ROHSAmphenolPin Headers
SK12
SMA(DO-214AC)-55℃~+150℃ 1 Independent 1A 200uA@20V 20V 30A 500mV@1A SMA(DO-214AC) Schottky Diodes ROHSSuzhou Good-Ark ElecSchottky Diodes
README
README.mdRagnohacks PCB
This is the repo containing the design files for the PCB which may be used in the Ragnohacks hackathon
3D PCB Preview
.png)
.png)
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8, C11, C12, C15, C16, C17 |
| 2 | 18pF | Capacitor_SMD:C_0402_1005Metric | C13, C14 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C9, C10 |
| 2 | 360R | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 5k1 | Capacitor_SMD:C_0402_1005Metric | R5, R6 |
| 2 | Conn_01x18 | Connector_PinSocket_2.54mm:PinSocket_1x18_P2.54mm_Vertical | J2, J3 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D3 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C18 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | D_Schottky | Diode_SMD:D_SMA | D2 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U4 |
| 1 | USB_A | Connector_USB:USB_A_Edge | J4 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J5 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U2 |
Similar boards
- 4 layers127.5 × 51.5 mm
EMIsniffer
evabits/EMI_sniffer_beursgadget_WOTS_2026
Schematics. Layout and Firmware of the WOTS2026 beursgadget.
174 parts7MIT - 4 layers150 × 120 mm
Ephys test board
open-ephys/ephys-test-board
General purpose, automated electrophysiology test board
567 parts1 - 4 layers40 × 40 mm
- 4 layers77.2 × 86.4 mm
Mad RP2040
Cimos/etchy
Fast, trustworthy PCB visual and geometric diff tool (Rust). Successor to gerber-diff.
117 parts1Apache-2.0 - 4 layers52 × 51 mm
- 4 layers140 × 97 mm
MainBoard
Immortals-Robotics/MainBoard
Immortals main electronics for the Robocup Soccer Small-Size League
137 parts - 2 layers50 × 70 mm
Questions
How big is the Ragnohacks PCB PCB?
It measures 85.6 × 54 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ragnohacks PCB use?
38 parts, built around the SC0914(13), W25Q128JVSIQ, LD1117S33TR(MS) and USBLC6-2P6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ragnohacks PCB KiCad files?
From the AdamTuraj/Ragnohacks-PCB repository on GitHub, at the commit this page was made from: the board is Ragnohacks PCB.kicad_pcb and its schematic Ragnohacks PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ragnohacks PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask AdamTuraj before reusing the design.