Skip to the content
2 layers80 × 60 mmLM386 Amp, the printed circuit board in 3D

LM386 Amplifier with 20 gain

Size
80 × 60 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
11
Pads
29
Tracks, vias
64, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
12 Apr 2026
Updated
12 Apr 2026

Overview

LM386 Amp is an open-source printed circuit board by Acrop0liX, from the Acrop0liX/lm386-amplifier repository on GitHub. It is a 2-layer board of 80 × 60 mm with 9 parts on 11 nets, routed with 64 tracks and 0 vias.

It is built around the LM386. Its parts include 3 capacitors, 2 resistors, 2 connectors and 1 IC. It belongs with the audio and music boards of this library.

Main components

1

README

README.md

LM386 Audio Amplifier

A simple audio amplifier circuit designed in KiCad 10 as a beginner PCB design project.

How it works

The LM386 is a low-voltage audio power amplifier designed for consumer applications. This circuit runs at a fixed gain of 20 (26dB) and can drive an 8Ω speaker with up to 325mW of power from a 9V supply. The input stage includes a volume control potentiometer, and the output features a zobel network (10Ω resistor and 50nF capacitor) for stability and a 250µF DC-blocking capacitor for speaker protection.

Components

  • LM386 audio power amplifier IC
  • 10kΩ potentiometer
  • 10Ω resistor
  • 50nF capacitor
  • 250µF polarized capacitor
  • 100µF polarized capacitor
  • 3.5mm audio jack
  • DC barrel jack with switch
  • 2-pin speaker connector
  • 8Ω speaker (not included on PCB)
  • 9V power supply

Tools used

KiCad 10

Parts

9
QtyValueFootprintReferences
110Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2
110KPotentiometer_THT:Potentiometer_Alps_RK09K_Single_VerticalR1
110µFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC3
1250µFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC1
150nFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC2
1AudioJack2Connector_Audio:Jack_3.5mm_CUI_SJ1-3513N_HorizontalJ2
1Barrel_Jack_SwitchConnector_BarrelJack:BarrelJack_HorizontalJ3
1LM386Package_DIP:DIP-8_W7.62mmU1
1SpeakerConnector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.5_1x02_P3.50mm_HorizontalLS1

Similar boards

  • 2 layers152 × 88 mmRFBitBangSMT, the printed circuit board in 3D

    RFBitBangSMT

    profdc9/RFBitBanger

    A QRP digital transceiver created from readily available parts for off-the-grid maintenance

    271 parts222
  • 2 layers90 × 140 mmDrumkid, the printed circuit board in 3D

    Drumkid

    mattybrad/drumkid

    Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.

    70 parts137
  • 2 layersLM80C R6, the printed circuit board in 3D

    LM80C R6

    leomil72/LM80C

    A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

    153 parts123GPL-3.0
  • 2 layers145.3 × 44.5 mmScout, the printed circuit board in 3D

    Scout

    oskitone/scout

    3D-printed, Arduino-compatible, 17-key mono synth. Squeeeee!

    48 parts114
  • 2 layers184 × 114.8 mmPoly555, the printed circuit board in 3D

    Poly555

    oskitone/poly555

    The POLY555 is a polyphonic, analog, square wave synth based on the 555 timer chip.

    262 parts93
  • 4 layers223.3 × 120.1 mmISA FPGA v2, the printed circuit board in 3D

    ISA FPGA v2

    robfinch/Cores

    Cores ===== RTF's Cores Use at your own risk. Welcome to my galaxy of cores. Contained in the directories are IP cores, source code for digital circuits.

    132 parts78
  • 2 layers101.6 × 137.4 mmOpenxcvr, the printed circuit board in 3D

    Openxcvr

    dawsonjon/OpenXcvr

    Cost Effective HF transceiver based on max1000 FPGA module

    155 parts38MIT
  • 2 layers104.1 × 73.7 mmIsa opl2, the printed circuit board in 3D

    Isa opl2

    skiselev/isa-opl2

    ISA OPL2 Card

    61 parts36

Questions

How big is the LM386 Amp PCB?

It measures 80 × 60 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LM386 Amp use?

9 parts, built around the LM386. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LM386 Amp KiCad files?

From the Acrop0liX/lm386-amplifier repository on GitHub, at the commit this page was made from: the board is LM386_Amp.kicad_pcb and its schematic LM386_Amp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LM386 Amp design in my own project?

Its repository states no licence, so its author keeps all rights: ask Acrop0liX before reusing the design.