
Project 3 - Tiny Solar Power Supply
Abdulrahman1817/PCB-designs
This repository contains PCB design projects, including schematics, board layouts, Gerber files, bill of materials (BOM), and supporting documentation.

This repository contains PCB design projects, including schematics, board layouts, Gerber files, bill of materials (BOM), and supporting documentation. The designs cover various applications such as embedded systems, sensor interfaces, power electronics, and IoT devices.
Pcb2 is an open-source printed circuit board by Abdulrahman1817, from the Abdulrahman1817/PCB-designs repository on GitHub. It is a 2-layer board of 63.7 × 60.8 mm with 32 parts on 47 nets, routed with 369 tracks and 59 vias.
It is built around the ESP32-WROOM-32E. Its parts include 9 connectors, 8 diodes, 7 resistors, 4 capacitors and 2 ICs. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1N5819 | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 |
| 6 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J3, J4, J5, J6, J10 |
| 5 | 100k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5 |
| 2 | 0.1uf | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R6, R7 |
| 2 | 10uf | Capacitor_SMD:C_0603_1608Metric | C2, C4 |
| 2 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J8, J9 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1, SW2 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | ESP32-WROOM-32E | RF_Module:ESP32-WROOM-32E | U2 |
| 1 | TB6612FNG | Package_SO:SSOP-24_5.3x8.2mm_P0.65mm | U1 |

Abdulrahman1817/PCB-designs
This repository contains PCB design projects, including schematics, board layouts, Gerber files, bill of materials (BOM), and supporting documentation.

Abdulrahman1817/PCB-designs
This repository contains PCB design projects, including schematics, board layouts, Gerber files, bill of materials (BOM), and supporting documentation.

hydromisc/hydromisc
Open hardware to measure EC and pH, drive pumps, and otherwise manage a mid-size hydroponic grow over Wi-Fi.

QuantumVillage/UncutGem
A prototype Full Stack fully Open Source NV Center Diamond Magnetometer


SRA-VJTI/sra-board-hardware-design
ESP32-based Development Board for Robotics and Embedded Applications

ricardoquesada/unijoysticle2
Bluetooth gamepad support for the Commodore 64 / Atari / Amiga, etc.

Brobiwann/ESP-spider
The ESP-Spider is a quadruped robot inspired by the miniKame (https://github.com/JavierIH/miniKame) . Like the miniKame, it uses sinusoidal functions to control servo positions, but the design and code were developed…


kbx81/kbxLEDController-16ch
kbx's 16-channel ESP-32 Powered LED Strip Controller
It measures 63.7 × 60.8 mm and has 2 copper layers, 1.6 mm thick.
32 parts, built around the ESP32-WROOM-32E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Abdulrahman1817/PCB-designs repository on GitHub, at the commit this page was made from: the board is Project 5 - Motor Drive for LFR/pcb2.kicad_pcb and its schematic Project 1 - LED Torch/Project 1 - LED Torch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Abdulrahman1817 before reusing the design.