4 layers40 × 100 mm
BR Motor
axpaul/Avionic-Mastodonte
Mastodonte experimental rocket avionic (On-board electronics) created by Paul Miailhe, Version 2025
118 parts6CERN-OHL-S-2.0
2 layers74.3 × 41.6 mm
LED Memory Game Nano
Aahil78/LED_Memory_Game_NanoA simple LED Memory Game PCB with an integrated Arduino Nano
- Size
- 74.3 × 41.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 37
- Pads
- 80
- Tracks, vias
- 88, 3
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 12 May 2025
- Updated
- 18 Jun 2025
Overview
LED Memory Game Nano is an open-source printed circuit board by Aahil78, from the Aahil78/LED_Memory_Game_Nano repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 74.3 × 41.6 mm with 23 parts on 37 nets, routed with 88 tracks and 3 vias.
It is built around the LM340AT-5.0. Its parts include 4 resistors, 4 diodes, 4 switches, 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdLED Memory Game
This is a simple LED Memory Game PCB that has a built-in Arduino Nano, 4 LEDs (Red, Green, Blue, Yellow), 4 Buttons, a vibration motor/buzzer, DC barel jack, 4 resistors, and that's it!
Slack Username
- @Aahil
- Slack ID: U08GLNF2JMU
Pictures
Schematic
PCB
3D View
Features
- Easy to assemble
- Fun to play
- Randomized sequence each level
- Has a time limit to enter sequence for better gameplay
- Each press and LED Glow gives a different note
- Easy to program and can be used for other projects
BOM
- 4 LEDs (Red, Green, Blue, Yellow)
- 4 Resistors (220ohm)
- 4 Pushbuttons
- 1 Vibration Motor or Buzzer
- 1 DC Barrel Jack
- 1 Arduino Nano with pin headers
- 1 JST Connector
- 2 Slideswitches (Volume & Power)
- 1 Voltage Regulator
- Thats it!
The Log --- For Highway
- It's given in a seperate markdown file.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 220ohm | PCM_Resistor_THT_AKL:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 4 | LOGO | LOGO | G***, G***, G***, G*** |
| 2 | SW_Wuerth_450301014042 | Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | PWR On/Off, Volume On/Off |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | B | button:SW_PUSH_6mm_RW | SW3 |
| 1 | Blue | LED_THT:LED_D3.0mm | D3 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | DC Barrel | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal | J1 |
| 1 | G | button:SW_PUSH_6mm_RW | SW2 |
| 1 | Green | LED_THT:LED_D3.0mm | D4 |
| 1 | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | Alternative_Bat |
| 1 | LM340AT-5.0 | PCM_Package_TO_SOT_THT_AKL:TO-220-3_Vertical | U1 |
| 1 | R | button:SW_PUSH_6mm_RW | SW1 |
| 1 | Red | LED_THT:LED_D3.0mm | D1 |
| 1 | Y | button:SW_PUSH_6mm_RW | SW4 |
| 1 | Yellow | LED_THT:LED_D3.0mm | D2 |
Similar boards
- 2 layers190.6 × 172.4 mm
- 2 layers65 × 56 mm
- 2 layers14 × 100 mm
Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm
- 2 layers138.8 × 89.8 mm
- 2 layers32.9 × 53.3 mm
- 2 layers35.5 × 50 mm
Questions
How big is the LED Memory Game Nano PCB?
It measures 74.3 × 41.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LED Memory Game Nano use?
23 parts, built around the LM340AT-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LED Memory Game Nano KiCad files?
From the Aahil78/LED_Memory_Game_Nano repository on GitHub, at the commit this page was made from: the board is src/LED Memory Game Nano.kicad_pcb and its schematic src/LED Memory Game Nano.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LED Memory Game Nano design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).