
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

A repository about my macropad / hackpad.
Shortpad R2 is an open-source printed circuit board by AUsualNoob, from the AUsualNoob/Shortpad repository on GitHub. It is a 2-layer board of 66.7 × 54.8 mm with 7 parts on 14 nets, routed with 183 tracks and 0 vias.
Its parts include 5 switches and 1 IC. It belongs with the keyboards and input boards and the RP2040 boards of this library.
The shortpad is a 5 Key macropad that uses KMK for software
I regret not adding a ground plane, I didn't even use any traces on the bottom
Made with Fusion360, idk what else to add honestly
The firmware was made using KMK and CircuitPython
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5 |
| 1 | OLED | OLED:OLED_v2 | OL1 |
| 1 | XIAO-RP2040-DIP | OPL:XIAO-RP2040-DIP | U2 |

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

It measures 66.7 × 54.8 mm and has 2 copper layers, 1.6 mm thick.
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AUsualNoob/Shortpad repository on GitHub, at the commit this page was made from: the board is PCB/Shortpad R2.kicad_pcb and its schematic PCB/Shortpad R2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask AUsualNoob before reusing the design.