2 layers
Cell Balancer
ARTS-Laboratory/SPARC
SPARC: Smart Pack for Advanced Research and Control
12 partsCC-BY-SA-4.0
2 layers118 × 75 mm
Cell Balancer
ARTS-Laboratory/SPARCSPARC: Smart Pack for Advanced Research and Control
- Size
- 118 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 37
- Pads
- 72
- Tracks, vias
- 75, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 9 Dec 2024
- Updated
- 21 Oct 2026
Overview
Cell Balancer is an open-source printed circuit board by ARTS-Laboratory, from the ARTS-Laboratory/SPARC repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 118 × 75 mm with 14 parts on 37 nets, routed with 75 tracks and 0 vias.
Its parts include 10 resistors and 2 connectors.
README
Readme.mdSmart-Pack-for-Advanced-Research-and-Control (SPARC)
The SPARC Pack is an open-source, research-grade battery system designed to advance thermal and electro-thermal modeling techniques while integrating state-of-the-art sensing and Battery Management System (BMS) technologies. Its modular design supports both cylindrical and pouch cell configurations, enabling cutting-edge investigations into battery performance, health, and reliability under diverse operating conditions.
Variations
Camden
A pack designed around the Samsung 30Q as a 10S1P nominal 40 V pack.
Licensing and Citation
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License [cc-by-sa 4.0].
Cite this as:
@Misc{ARTSLabSmartPackAdvanced,
author = {ARTS-Lab},
howpublished = {GitHub},
title = {Smart-Pack-for-Advanced-Research-and-Control},
groups = {ARTS-Lab},
url = {https://github.com/ARTS-Laboratory/Smart-Pack-for-Advanced-Research-and-Control},
note = {Accessed: Month dd, yyyy},
}
QR code for repo.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | R | Resistor_SMD:R_1812_4532Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10 |
| 1 | DC37_Pins | Connector_Dsub:DSUB-37_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm | J2 |
| 1 | Screw_Terminal_01x11 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-11_1x11_P5.00mm_Horizontal | J1 |
The 12 most common of 14 parts.
More from ARTS-Laboratory/SPARC
2- 2 layers29.5 × 60 mm
Cell Balancer
ARTS-Laboratory/SPARC
SPARC: Smart Pack for Advanced Research and Control
11 partsCC-BY-SA-4.0
Similar boards
- 2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0 - 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
Questions
How big is the Cell Balancer PCB?
It measures 118 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cell Balancer use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cell Balancer KiCad files?
From the ARTS-Laboratory/SPARC repository on GitHub, at the commit this page was made from: the board is variations/Camden/V0.2.2/software/KiCad/Cell_Balancer.kicad_pcb and its schematic variations/Camden/V0.2.1/software/KiCad/Cell_Balancer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cell Balancer design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).