2 layers30.7 × 53.4 mm
Power board v2
ARTS-Laboratory/IoT-Water-Level-Sensor
A low-cost, IOT water level sensor package alternative to traditional gauging equipment.
16 partsCC-BY-SA-4.0
2 layers34.9 × 53.3 mm
Datalogger board v1
ARTS-Laboratory/IoT-Water-Level-SensorA low-cost, IOT water level sensor package alternative to traditional gauging equipment.
- Size
- 34.9 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 103
- Pads
- 172
- Tracks, vias
- 144, 30
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 10 May 2024
- Updated
- 26 Sep 2024
Overview
Datalogger board v1 is an open-source printed circuit board by ARTS-Laboratory, from the ARTS-Laboratory/IoT-Water-Level-Sensor repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 34.9 × 53.3 mm with 23 parts on 103 nets, routed with 144 tracks and 30 vias.
It is built around the DS3231MZ+. Its parts include 8 resistors and 2 capacitors. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
system_development/WiFi/v0.1/Data Logging PCB files/Data Logging PCBv0.20/README.mdDatalogging Board
These are the KiCad files used to create the datalogging PCB.
.SCH
This is the electrical wiring diagram for the PCB. This file contains links to the datasheets for all components used in the PCB.
.PCB
This is the file for creating the physical PCB (as well as offering a 3D render of the PCB)
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | R | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R4, R5, R6, R7, R8 |
| 5 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | DATA, ERROR, GPS, MQTT, NET |
| 2 | C | Capacitor_SMD:C_1206_3216Metric | C1, C2 |
| 1 | Arduino_Mega2560_Shield | Arduino_Boards:Arduino_Mega2560_Shield | XA1 |
| 1 | Battery_Cell | ARTS-lab:battery_holder_10mm | BT1 |
| 1 | DS3231M | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | DS3231 |
| 1 | HCSR04 | ARTS-lab:HCSR04 | JSN-SR04 |
| 1 | MPRLS | dhec:MPRLS | MPRLS |
| 1 | Pressure_transducer | dhec:pressure_sensor | PTS |
| 1 | TC2014-3.3VxCTTR | Package_TO_SOT_SMD:SOT-23-5 | ADP121 |
| 1 | microSD_small | ARTS-lab:small_microSD_v2 | MICRO SD |
More from ARTS-Laboratory/IoT-Water-Level-Sensor
6- 2 layers30.5 × 53.3 mm
Power PCB
ARTS-Laboratory/IoT-Water-Level-Sensor
A low-cost, IOT water level sensor package alternative to traditional gauging equipment.
14 partsCC-BY-SA-4.0 - 2 layers30.7 × 53.4 mm
Power board v1
ARTS-Laboratory/IoT-Water-Level-Sensor
A low-cost, IOT water level sensor package alternative to traditional gauging equipment.
12 partsCC-BY-SA-4.0 - 2 layers30.5 × 53.3 mm
Power PCB
ARTS-Laboratory/IoT-Water-Level-Sensor
A low-cost, IOT water level sensor package alternative to traditional gauging equipment.
11 partsCC-BY-SA-4.0 - 2 layers34.3 × 53.3 mm
Data Collection Logging PCB
ARTS-Laboratory/IoT-Water-Level-Sensor
A low-cost, IOT water level sensor package alternative to traditional gauging equipment.
8 partsCC-BY-SA-4.0 - 2 layers35.6 × 69.9 mm
Data Collection Logging PCB
ARTS-Laboratory/IoT-Water-Level-Sensor
A low-cost, IOT water level sensor package alternative to traditional gauging equipment.
8 partsCC-BY-SA-4.0
Similar boards
- 2 layers245.2 × 100 mm
V5 main
zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
160 parts156 - 2 layers82 × 42 mm
Open authenticator
Open-Authenticator/hardware-design
Hardware design files for open authenticator
86 parts42MIT - 4 layers100 × 75 mm
OpenAirScope
emertcakir/OpenAirScope
Open-source air quality and environmental monitoring node with STM32H743 + ESP32-C3, LoRaWAN, RS485, USB-C, Li-ion charging, and multi-sensor support.
282 parts26MIT - 2 layers117.8 × 168 mm
Picon one v1.0a
fm4dd/picon-one-hw
KiCad PCB, gerber, and CAD files for the PiCon-One controller.
73 parts23 - 2 layers96 × 26 mm
- 2 layers60 × 100 mm
- 2 layers87 × 47 mm
- 2 layers83.8 × 41.4 mm
Questions
How big is the Datalogger board v1 PCB?
It measures 34.9 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Datalogger board v1 use?
23 parts, built around the DS3231MZ+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Datalogger board v1 KiCad files?
From the ARTS-Laboratory/IoT-Water-Level-Sensor repository on GitHub, at the commit this page was made from: the board is system_development/Cellular/v0.1/EDA/datalogger_board_v1/v1.kicad_pcb and its schematic system_development/Cellular/v0.1/EDA/datalogger_board_v1/v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Datalogger board v1 design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).