
OSO SWAT C1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

Repo contenant l'ensemble des documents liés au robot de la coupe de France de Robotique 2025
Power supply 5V is an open-source printed circuit board by AREM-Projets, from the AREM-Projets/Robot-CdR-2025 repository on GitHub. It is a 2-layer board of 102.2 × 71.3 mm with 28 parts on 10 nets, routed with 64 tracks and 0 vias.
Its parts include 13 connectors, 3 ICs, 1 resistor, 1 diode and 1 fuse. It belongs with the power and robots and motor control boards of this library.
Repo contenant l'ensemble des documents liés au robot de la coupe de France de Robotique 2025
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | Conn_JST_XH_2_pins | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3, J4, J5, J12, J14, J16, J17, J18 |
| 5 | Conn_01x01 | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | 5,1V, 24V, buckA, buckB, GND |
| 3 | MountingHole | MountingHole:MountingHole_3mm | H1, H2, H3 |
| 3 | ~ | lib5v:HW_411 | U1, U2, U3 |
| 2 | Conn_01x02_Pin | Connector_BarrelJack:BarrelJack_Horizontal | J8, J13 |
| 2 | Conn_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J1, J11 |
| 1 | Conn_01x02_Pin | lib5v:AMASS_XT60PW-M | J6 |
| 1 | Fuse | Fuse:Fuse_BelFuse_0ZRE0100FF_L18.7mm_W5.1mm | F1 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | LOGO | LOGO | G*** |
| 1 | R | Resistor_THT:R_Box_L14.0mm_W5.0mm_P9.00mm | R1 |

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

asterics/esp32_mouse_keyboard
ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)


Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
It measures 102.2 × 71.3 mm and has 2 copper layers, 1.6 mm thick.
28 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AREM-Projets/Robot-CdR-2025 repository on GitHub, at the commit this page was made from: the board is PCB/Alim-5V/power_supply_5V.kicad_pcb and its schematic PCB/Alim-5V/power_supply_5V.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask AREM-Projets before reusing the design.