Skip to the content
2 layers80.6 × 78.1 mmTimer Counter, the printed circuit board in 3D
Size
80.6 × 78.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
45
Pads
76
Tracks, vias
124, 7
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
26 Apr 2026
Updated
31 May 2026

Overview

Timer Counter is an open-source printed circuit board by AOD-gm, from the AOD-gm/Timer_Counter-STM32F103C8T6- repository on GitHub. It is a 2-layer board of 80.6 × 78.1 mm with 9 parts on 45 nets, routed with 124 tracks and 7 vias.

README

README.md

TIMER COUNTER


📂 Chi tiết thư mục

📂 Bấm để xem cấu trúc thư mục dự án (Project Structure)
text
📂 Timer Counter
├── 📦 Core
│   ├── 📂 Inc
│   │   ├── 📜 DS1307.h        # Thư viện RTC DS3231/DS1307
│   │   ├── 📜 Esp_01.h        # Thư viện giao tiếp ESP-01
│   │   ├── 📜 FontSSD1306.h   # Font chữ cho OLED SSD1306
│   │   ├── 📜 HLK_LD2410.h    # Driver cảm biến Radar hiện diện
│   │   ├── 📜 Keypad.h        # Thư viện ma trận phím
│   │   ├── 📜 Menu_UI.h       # Logic Menu & Giao diện OLED
│   │   ├── 📜 MH-R38.h        # Giải mã tín hiệu Remote IR
│   │   └── 📜 SSD1306.h       # Thư viện điều khiển màn hình OLED
│   └── 📂 Src
│       ├── 📜 main.c          # Luồng xử lý chính
│       ├── 📜 Menu_UI.c       # Cấu trúc hiển thị Menu
│       └── 📜 ...             # Các file xử lý tương ứng (.c)
├── 📦 Esp-01
│   ├── 📂 inc
│   │   └── 📜 wifiConfig.h    # Cấu hình WiFi & Web Server
│   └── 📂 src
│       └── 📜 WifiConfig.cpp  # Xử lý logic kết nối
└── 📦 PCB
    ├── 📂 GiaCong             # File Gerber, BOM để đặt mạch
    └── 📂 Timer_Counter       # File thiết kế gốc (KiCad)

🛠️ Phần cứng sử dụng

**1. Vi điều khiển trung tâm** * STM32F103C8T6 (ARM Cortex-M3)

2. Cảm biến & Module ngoại vi

  • Mô-đun kết nối: ESP8266 (ESP-01) cấu hình Web Server.

  • Cảm biến hiện diện: Radar HLK-LD2410C (nhận diện vi chuyển động).

  • Module thời gian thực: DS3231 / DS1307 (lưu giữ ngày giờ).

  • Màn hình hiển thị: OLED 0.96 inch (IC SSD1306).

  • Khối điều khiển & Giao tiếp: Bàn phím ma trận (Keypad) & MH-R38 (nhận tín hiệu Remote IR)

Sơ đồ nối chân

🛠️ Phần cứng📌 Chân STM32🔗 Giao tiếp📝 Chức năng
🖥️ OLED SSD1306PB6 (SCL)
PB7 (SDA)
I2C1Hiển thị thông tin giao diện người dùng
🌐 ESP-01 (WiFi)PA9 (TX)
PA10 (RX)
UART1Web Server & Phát WiFi điều khiển từ xa
⏳ RTC DS3231PB6 (SCL)
PB7 (SDA)
I2C1Lưu thời gian & Báo thức (chạy khi mất điện)
📡 Radar LD2410PA2 (TX)
PA3 (RX)
UART2Nhận diện người (vi chuyển động)
🎛️ Keypad 4x4PB12-15
PA4-7
GPIOĐiều khiển Menu
🖲️ Mắt thu IRPA1TIM2Nhận tín hiệu Remote hồng ngoại

Yêu Cầu



Parts

9
QtyValueFootprintReferences
2Conn_01x20Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_VerticalJ1, J2
1Conn_01x03Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalIR1
1Conn_01x04Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_HorizontalOled1
1Conn_01x05Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_HorizontalLD2410c1
1Conn_01x06Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalDS3231
1Conn_01x08Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalKey_pad1
1Conn_02x04_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_VerticalESP01
1LEDConnector_PinSocket_2.00mm:PinSocket_1x02_P2.00mm_VerticalJ3

Similar boards

  • 2 layers103 × 30.5 mmTS Back Endcap, the printed circuit board in 3D

    TS Back Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    9 parts1.3kMIT
  • 2 layers31.8 × 47.6 mmNGC 38 connector, the printed circuit board in 3D

    NGC 38 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    9 parts1.2k
  • 2 layers24 × 27.3 mmExpansion Card Retrofit, the printed circuit board in 3D

    Expansion Card Retrofit

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    9 parts1.1kCC-BY-4.0
  • 2 layers15.6 × 17.3 mmSKR Mini TFT Thermistor Board, the printed circuit board in 3D

    SKR Mini TFT Thermistor Board

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    9 parts1.1kGPL-3.0
  • 2 layers39.1 × 49.5 mmLearnoliver, the printed circuit board in 3D

    Learnoliver

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    9 parts915
  • 2 layers17.4 × 16.9 mmToolhead, the printed circuit board in 3D

    Toolhead

    tanaes/whopping_Voron_mods

    9 parts787GPL-3.0
  • 2 layers9.8 × 108 mmExpander, the printed circuit board in 3D

    Expander

    wntrblm/Castor_and_Pollux

    A Juno-inspired dual oscillator

    9 parts587
  • 2 layersKeyboard after, the printed circuit board in 3D

    Keyboard after

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    9 parts547GPL-3.0

Questions

How big is the Timer Counter PCB?

It measures 80.6 × 78.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Timer Counter use?

9 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Timer Counter KiCad files?

From the AOD-gm/Timer_Counter-STM32F103C8T6- repository on GitHub, at the commit this page was made from: the board is PCB/Timer_Counter/Timer_Counter.kicad_pcb and its schematic PCB/Timer_Counter/Timer_Counter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Timer Counter design in my own project?

Its repository states no licence, so its author keeps all rights: ask AOD-gm before reusing the design.