2 layers36 × 49.8 mm
WeatherStation v1.2
ismangoman/Weather-station
Full fleged weather station powered by solar
17 parts1MIT
2 layers36.1 × 46.2 mm
RGB ESP32
ANSHUMANDOCX/ESP32-RGB-controllerThis is a ESP32 server based RGB controller for a 5050 led strip
- Size
- 36.1 × 46.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 45
- Pads
- 114
- Tracks, vias
- 91, 66
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Nov 2025
- Updated
- 8 Nov 2025
Overview
RGB ESP32 is an open-source printed circuit board by ANSHUMANDOCX, from the ANSHUMANDOCX/ESP32-RGB-controller repository on GitHub. It is a 2-layer board of 36.1 × 46.2 mm with 23 parts on 45 nets, routed with 91 tracks and 66 vias.
It is built around the ESP32-WROOM-32E, AMS1117-3.3 and IRLZ44N. Its parts include 7 resistors, 4 capacitors, 3 transistors, 3 connectors and 2 ICs. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
Main components
3
ESP32-WROOM-32E
SMD,18x25.5mmSMD,18x25.5mm WiFi Modules ROHSEspressif SystemsWiFi Modules
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
IRLZ44N
TO-22055V 47A N-Channel HEXFET® Power MOSFETInfineon TechnologiesUncategorised
README
README.mdESP32 WiFi RGB Controller
This is a controller for a 5050 12v RGB leds which is controlled via an Web interface using a ESP32.
Basic working mechanism
these 5050 led strips are common anode so, using mosfets connected to each colour R G B we can controll the bright ness of each light which in turn will help us choose any coulour we want.
Parts used
- ESP32 Wroom
- IRFZ44N N-channel Mosfets
- 12V Supply
- 5050 Common anode RGB leds
Schematic PCB and CAD
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4 |
| 2 | 220R | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | C | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J3 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5, D6 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW3, SW4 |
| 1 | 104 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C18 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 2.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 47uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C22 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Barrel_Jack_MountingPin | Connector_BarrelJack:BarrelJack_Kycon_KLDX-0202-xC_Horizontal | J1 |
| 1 | ESP32-WROOM-32E | RF_Module:ESP32-WROOM-32D | U1 |
Similar boards
- 4 layers86 × 86 mm
BMS
vadymtaranenko/ESP32-3S-BMS
Prosty, niezawodny system zarządzania pakietami Li-Po 3S oparty na mikrokontrolerze ESP32. Układ komunikuje się po magistrali SPI.
122 parts - 2 layers90.2 × 90 mm
Sra dev board 2026
SRA-VJTI/sra-board-hardware-design
ESP32-based Development Board for Robotics and Embedded Applications
219 parts81MIT - 4 layers62.5 × 60 mm
Unijoysticle2 c64
ricardoquesada/unijoysticle2
Bluetooth gamepad support for the Commodore 64 / Atari / Amiga, etc.
58 parts62 - 2 layers54.2 × 75.2 mm
KiCAD Design
Brobiwann/ESP-spider
The ESP-Spider is a quadruped robot inspired by the miniKame (https://github.com/JavierIH/miniKame) . Like the miniKame, it uses sinusoidal functions to control servo positions, but the design and code were developed…
70 parts44 - 4 layers65.9 × 52.9 mm
- 2 layers100 × 55 mm
PCBTriatlonWAY
Alejojoa/Triatlon-Alita
Repositorio dedicado al desarollo de un robot triatlon.
43 parts6 - 2 layers21 × 81.2 mm
Lowpolylight
bitsandpixels-io/rgb-butterfly
Butterfly-shaped RGB light panel using ESPHome
17 parts5MIT
Questions
How big is the RGB ESP32 PCB?
It measures 36.1 × 46.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RGB ESP32 use?
23 parts, built around the ESP32-WROOM-32E, AMS1117-3.3 and IRLZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RGB ESP32 KiCad files?
From the ANSHUMANDOCX/ESP32-RGB-controller repository on GitHub, at the commit this page was made from: the board is PCB/RGB ESP32.kicad_pcb and its schematic PCB/RGB ESP32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RGB ESP32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask ANSHUMANDOCX before reusing the design.