
Main board No gyro
ALLAN-mfQ/TrackBall_PC-GAME_Controller
This is recognized as a keyboard and mouse when viewed from a PC. 3D data can be printed with a 6.08" resin 3D printer.

This is recognized as a keyboard and mouse when viewed from a PC. 3D data can be printed with a 6.08" resin 3D printer.
Button board is an open-source printed circuit board by ALLAN-mfQ, from the ALLAN-mfQ/TrackBall_PC-GAME_Controller repository on GitHub. It is a 2-layer board of 95.8 × 53.5 mm with 48 parts on 32 nets, routed with 237 tracks and 14 vias.
2022/12/18
ジャイロセンサーを追加しました。
メインボードを新しくしてMPU6050を搭載しました。
新しい基板はボタンを2つ追加できるようにしてあります。 必要に応じて改造可能です。
+GYROにデータを公開しています。

・メインボードのシルクが一部間違っていたので修正しました。 × BS.L → 〇 RB.R
・KiCadのプロジェクトファイルを公開しました。
キーボードとマウスとして認識します。
3Dデータは6.08インチの光造形3Dプリンターで印刷可能です。
This is recognized as a keyboard and mouse when viewed from a PC.
3D data can be printed with a 6.08" resin 3D printer.
https://github.com/zapmaker/OptiMouse
OptiMouse replaces ADNS2083.cpp and ADNS2083.h with "OptiMouse_MX8650_fix setting".




この 作品 は クリエイティブ・コモンズ 表示 - 非営利 - 継承 4.0 国際 ライセンスの下に提供されています。
You are free to:
Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
NonCommercial — You may not use the material for commercial purposes.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10k, R470 |
| 1 | A07-12-X5 | 5way_joystick:A07-12-X5 | A07-12-X5 |
| 1 | LOGO | logo:tcfpo | G*** |
| 1 | SC-59_Handsoldering | Package_TO_SOT_SMD:SC-59_Handsoldering | PNP |
The 5 most common of 48 parts.

ALLAN-mfQ/TrackBall_PC-GAME_Controller
This is recognized as a keyboard and mouse when viewed from a PC. 3D data can be printed with a 6.08" resin 3D printer.

ALLAN-mfQ/TrackBall_PC-GAME_Controller
This is recognized as a keyboard and mouse when viewed from a PC. 3D data can be printed with a 6.08" resin 3D printer.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing



softerhardware/Hermes-Lite2
A second generation low-cost amateur HF software defined radio transceiver.

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

loxodes/vna
Under development open hardware microwave vector network analyzer

fellesverkstedet/fabricatable-machines
Motion systems for flexible digital fabrication and research. Easy to fabricate and customize. Documentation: https://github.com/fellesverkstedet/fabricatable-machines/wiki
It measures 95.8 × 53.5 mm and has 2 copper layers, 1.6 mm thick.
48 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ALLAN-mfQ/TrackBall_PC-GAME_Controller repository on GitHub, at the commit this page was made from: the board is KICad/button_board/button_board.kicad_pcb and its schematic +GYRO/KICad PROJECT/main_board_gyro/main_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ALLAN-mfQ before reusing the design.