2 layers50.8 × 76.2 mm
2 layers101.6 × 63.5 mm
Project Karman's simulations
- Size
- 101.6 × 63.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 99
- Pads
- 196
- Tracks, vias
- 373, 17
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 8 Jun 2016
- Updated
- 12 Feb 2018
Overview
NH PCB is an open-source printed circuit board by AIAANortheastern, from the AIAANortheastern/KarmanSims repository on GitHub. It is a 2-layer board of 101.6 × 63.5 mm with 32 parts on 99 nets, routed with 373 tracks and 17 vias.
It is built around the L7805ACV. Its parts include 7 connectors, 4 diodes, 3 capacitors, 3 ICs and 1 resistor. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
1README
README.mdKarmanSims
Project Karman's simulations
Design ins
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | D_Schottky | Diodes_THT:Diode_DO-41_SOD81_Vertical_AnodeUp | D1, D2, D3 |
| 2 | TCA-ADA-269 | adafruit_BOBs:TCA_BOB_ADA269 | TC1, TC2 |
| 1 | 100nF | Capacitors_THT:C_Rect_L4.6mm_W2.0mm_P2.50mm_MKS02_FKP02 | C3 |
| 1 | 10DOF_A1604 | adafruit_BOBs:10DOF_BOB_ADA16014 | U3 |
| 1 | 10µF | Capacitors_THT:C_Rect_L4.6mm_W2.0mm_P2.50mm_MKS02_FKP02 | C1 |
| 1 | 10µf | Capacitors_THT:C_Rect_L4.6mm_W2.0mm_P2.50mm_MKS02_FKP02 | C2 |
| 1 | 180 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 33_Jump | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP2 |
| 1 | ACCL_BOB_A1413 | adafruit_BOBs:Accel_BOB_A1413 | U2 |
| 1 | BARREL_JACK | custom_master:BARREL_JACK_W_Header_Holes | J4 |
| 1 | Battery_Cell | custom_master:CR1220_Conn_TH_MPD | BT1 |
| 1 | Buzzer | adafruit_BOBs:Buzzer_A1536 | BZ1 |
| 1 | I2C_Debug | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J6 |
| 1 | L4931 | TO_SOT_Packages_THT:TO-92_Inline_Wide | Reg1 |
| 1 | L7805AC | TO_SOT_Packages_THT:TO-220_Vertical | REG1 |
| 1 | LED | LEDs:LED-3MM | D4 |
| 1 | LOGO | logos:aiaa_logo_inverse_2in_bSS | G*** |
| 1 | LOGO | logos:aiaa_logo_pt5in_fss | G*** |
| 1 | Pow_byp | Pin_Headers:Pin_Header_Straight_1x03 | J3 |
| 1 | Pow_in | Pin_Headers:Pin_Header_Straight_1x02 | J7 |
| 1 | SPI_debug | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J5 |
| 1 | STRAT_CONN | Connectors_JST:JST_SH_SM05B-SRSS-TB_05x1.00mm_Angled | J2 |
| 1 | Teensy3.6 | Teensy:Teensy35_36 | U1 |
| 1 | VUSB_Jump | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP1 |
| 1 | Xbee-Conn | Connectors:IDC_Header_Straight_10pins | J1 |
The 28 most common of 32 parts.
More from AIAANortheastern/KarmanSims
3
Similar boards
- 2 layers134.6 × 88.9 mm
CaRFID
levipinkard/CaRFID
Custom RFID-based ignition switch replacement, meant for implant use
34 parts5GPL-2.0 - 2 layers41.7 × 15 mm
Fume Extractor
khaosdoctor/kicad-fume-extractor-5v
Small learning project for a DIY fume extractor using a 9v battery and a 5v replaceable fan
13 parts - 2 layers50 × 23.2 mm
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
32 parts1kGPL-3.0 - 2 layers136.8 × 54.2 mm
Retropie zero
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
32 parts915 - 2 layers
- 2 layers16 × 20 mm
ESPKey
octosavvi/ESPKey
Wiegand data logger, replay device and micro door-controller
32 parts353GPL-2.0 - 2 layers82 × 40.9 mm
Display7447
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
32 parts269 - 2 layers40 × 38 mm
Shield
murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.
32 parts192MIT
Questions
How big is the NH PCB PCB?
It measures 101.6 × 63.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NH PCB use?
32 parts, built around the L7805ACV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NH PCB KiCad files?
From the AIAANortheastern/KarmanSims repository on GitHub, at the commit this page was made from: the board is Newer hotness/NH_PCB_V4/NH_PCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the NH PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask AIAANortheastern before reusing the design.