
ButtonsLEDs
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

Totem 0 3 is an open-source printed circuit board by A-Helberg, from the A-Helberg/A-TOTEM repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 258.8 × 94.4 mm with 100 parts on 78 nets, routed with 1,771 tracks and 154 vias.
Its parts include 2 ICs and 2 connectors. It belongs with the nRF52 and nRF5x boards of this library.

Credit for the original design of the TOTEM goes to GEIST.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 38 | D_Small | TOTEMlib:Diode_SOD123 | DL1, DL2, DL3, DL4, DL5, DL6, DL10, DL11, DL12, DL13, DL14, DL15, DL16, DL17, DL18, DL19 +22 |
| 38 | SW_Push_45deg | TOTEMlib:Kailh_socket_PG1350_optional | SWL1, SWL2, SWL3, SWL4, SWL5, SWL6, SWL10, SWL11, SWL12, SWL13, SWL14, SWL15, SWL16, SWL17, SWL18, SWL19 +22 |
| 2 | + | TOTEMlib:BatteryPad | BAT+1, BAT+2 |
| 2 | - | TOTEMlib:BatteryPad | BATGND1, BATGND2 |
| 2 | MJ-4PP-9 | TOTEMlib:MJ-4PP-9_1side | J1, J2 |
| 2 | SW_Push | TOTEMlib:SKHLLCA010 | RST, RSW1 |
| 2 | SW_SPDT | TOTEMlib:MSK12C02 | PWR, PWR |
| 2 | xiao-ble | TOTEMlib:xiao-ble-smd-cutout | U1, U2 |
The 88 most common of 100 parts.

shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

Redherring32/OpenTendo
An Open-Source HardWare (OSHW) recreation of the original 1985 front-loading NES Motherboard


vsfteam/vsf
Versaloon Software Framework -- a tiny preemptive-capable event-driven incremental software framework for embedded systems



cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.

It measures 258.8 × 94.4 mm and has 2 copper layers, 1.6 mm thick.
100 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the A-Helberg/A-TOTEM repository on GitHub, at the commit this page was made from: the board is totem_0_3.kicad_pcb and its schematic mcu_auxiliaries.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).