
Dryer Buzzer V3
97Cweb/Washer-Dryer-Buzzer
An Arduino project based on adding a buzzer to a washer and dryer on the same board

An Arduino project based on adding a buzzer to a washer and dryer on the same board
Dryer Buzzer V2 is an open-source printed circuit board by 97Cweb, from the 97Cweb/Washer-Dryer-Buzzer repository on GitHub. It is a 2-layer board of 54.6 × 58.5 mm with 13 parts on 36 nets, routed with 35 tracks and 2 vias.
Its parts include 6 resistors, 3 connectors, 1 capacitor and 1 transistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
A thing to build to put buzzers back on the washing machine and dryer
V1 used a photoresistor on the washing machine V2 uses 2 optocouplers to get the washing machine knob position.
Both use a non invasive current sensor for the dryer to get whether it is on or not.
You will also need a speaker module to get enough volume from the audio.
ARDUINO Nano 33 IOT
5PCS IR Infrared Slotted Optical Optocoupler Speed Measuring Sensor Module 3.3-5V for Arduino Also for Smart Robot Car Speed Measurement with Dupont Wire Amazon
Non-Invasive Current Sensor (30A) Canada Robotix
Stereo 20W Class D Audio Amplifier - MAX9744 Adafruit 1752
20W 4 Ohm Full Range Speaker - XS-GTF1027 Adafruit 1732
How to wire current sensor link
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5 |
| 2 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 2 | Conn_01x02_Female | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J2, J3 |
| 1 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 22 | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 2N2219 | Package_TO_SOT_THT:TO-39-3 | Q1 |
| 1 | 51 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | AudioJack3_SwitchTR | Connector_Audio:Jack_3.5mm_CUI_SJ1-3525N_Horizontal | J1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |

97Cweb/Washer-Dryer-Buzzer
An Arduino project based on adding a buzzer to a washer and dryer on the same board

97Cweb/Washer-Dryer-Buzzer
An Arduino project based on adding a buzzer to a washer and dryer on the same board



samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments


willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 54.6 × 58.5 mm and has 2 copper layers, 1.6 mm thick.
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the 97Cweb/Washer-Dryer-Buzzer repository on GitHub, at the commit this page was made from: the board is KiCad/Dryer Buzzer V2/Dryer Buzzer V2/Dryer Buzzer V2.kicad_pcb and its schematic KiCad/Dryer Buzzer V2/Dryer Buzzer V2/Dryer Buzzer V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask 97Cweb before reusing the design.