4 layers100 × 75 mm
ProgrammaGull Sandpiper
4n3m4i1/PG_Logic
Open Source FPGA Development Boards for Education and Deeply Embedded Applications
214 partsMIT
4 layers25.4 × 25.4 mm
ProgrammaGull E6
4n3m4i1/PG_LogicOpen Source FPGA Development Boards for Education and Deeply Embedded Applications
- Size
- 25.4 × 25.4 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 89
- Pads
- 204
- Tracks, vias
- 195, 15
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 15 Sep 2023
- Updated
- 6 Aug 2024
Overview
ProgrammaGull E6 is an open-source printed circuit board by 4n3m4i1, from the 4n3m4i1/PG_Logic repository on GitHub, published under the MIT licence. It is a 4-layer board of 25.4 × 25.4 mm with 31 parts on 89 nets, routed with 195 tracks and 15 vias.
It is built around the ICE40UP5K-SG48ITR50, W25Q32JVSSIQ and MIC5504-1.2YM5-TR, with the MIC5504-2.5YM5-TR and 1N4148WS among its other parts. Its parts include 17 capacitors, 6 resistors, 6 ICs and 1 diode. It belongs with the FPGA and CPLD boards of this library.
Main components
5
ICE40UP5K-SG48ITR50
QFN-48QFN-48 Programmable Logic Device (CPLDs/FPGAs) ROHSLatticeProgrammable Logic Device (CPLDs/FPGAs)
W25Q32JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 133MHz 1uA 2.7V~3.6V 20 Years 32Mbit 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
MIC5504-1.2YM5-TR
SOT-23-5-40℃~+125℃@(Tj) 1 1.2V 175uVrms 300mA 380mV@(300mA) 5.5V 55uA 60dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMIC5504-2.5YM5-TR
SOT-23-5-40℃~+125℃@(Tj) 1 175uVrms 2.5V 300mA 380mV@(300mA) 5.5V 55uA 60dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching Diodes
README
README.mdProgrammaGull Logic
Small and open source FPGA development boards for all those still pecking for fries.
Hardware
Design files provided for KiCad 7.
PGL Sandpiper
An education focused development platform, full of fun I/O and devices for users to learn the basics of real world FPGA development. The board centers around the Lattice iCE40-UP5k, which itself offers ample BRAM, PSRAM, 8 DSP Blocks, a PLL, and two internal oscillators.
PGL E3
An iCE40-UP5k SG48 development board and associated programmer board.
Designed to be embeddable and flexible enough for most projects!
PGL E6
A small embeddable Lattice iCE40-LP384 aimed at alleviating the overhead incurred when adding glue logic or general PL space into a project.
PGL E6-NF
The same PGL E6 but with no flash, allowing smaller footprints when accompanied by some external bitstream source (MCU, external flash, other FPGA, etc..)
Credits
Name: @slurpeecup
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C19, C20, C22 |
| 7 | 100n | Capacitor_SMD:C_0603_1608Metric | C7, C13, C15, C16, C17, C18, C21 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R4, R5, R8 |
| 1 | 100R | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | 1N4148WS | Diode_SMD:D_SOD-323 | D2 |
| 1 | AP7375-33SA-7 | Package_TO_SOT_SMD:SOT-23-3 | U9 |
| 1 | ICE40UP5K-SG48ITR | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U5 |
| 1 | MIC5504-1.2YM5 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | MIC5504-2.5YM5 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | PGL_E6 | ProgrammaGull_Logic:PGL_E6 | U1 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | W25Q32JVSS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U4 |
Questions
How big is the ProgrammaGull E6 PCB?
It measures 25.4 × 25.4 mm and has 4 copper layers, 1.6 mm thick.
What parts does the ProgrammaGull E6 use?
31 parts, built around the ICE40UP5K-SG48ITR50, W25Q32JVSSIQ, MIC5504-1.2YM5-TR and MIC5504-2.5YM5-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ProgrammaGull E6 KiCad files?
From the 4n3m4i1/PG_Logic repository on GitHub, at the commit this page was made from: the board is Boards/PGL_E6/ProgrammaGull_E6/ProgrammaGull_E6.kicad_pcb and its schematic Boards/PGL_E6/ProgrammaGull_E6/ProgrammaGull_E6.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ProgrammaGull E6 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from 4n3m4i1/PG_Logic
3- 4 layers100 × 75 mm
ProgrammaGull Sandpiper
4n3m4i1/PG_Logic
Open Source FPGA Development Boards for Education and Deeply Embedded Applications
191 partsMIT - 4 layers42 × 22 mm
PGL FTDI Prog
4n3m4i1/PG_Logic
Open Source FPGA Development Boards for Education and Deeply Embedded Applications
47 partsMIT
Similar boards
- 4 layers99.1 × 83.8 mm
Ibm-5151-pcb
asinghani/ibm-5151-controller
Building a VT100 emulator out of an IBM 5151 monitor and an FPGA
85 partsMIT - 2 layers25.6 × 0 mm
- 4 layers55.5 × 50 mm
- 4 layers48 × 48 mm
- 2 layers88.9 × 50.8 mm
- 4 layers65 × 30 mm
- 2 layers120 × 130 mm
SingularitySurfer V1
nkrackow/SingularitySurfer-FPGA-Lock-In-Amplifier
Repository for the development of an FPGA based DSP Lock-In Amplifier
174 parts80MIT - 4 layers32 × 63.8 mm
