

Transfem keyboard
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 47
- Pads
- 147
- Tracks, vias
- 153, 27
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Nov 2025
- Updated
- 8 Jan 2026
Overview
Transfem keyboard is an open-source printed circuit board by 3nt3, from the 3nt3/transfem-keyboard repository on GitHub. It is a 4-layer board with 27 parts on 47 nets, routed with 153 tracks and 27 vias.
It is built around the LP5907MFX-3.3. Its parts include 10 capacitors, 4 resistors, 2 ICs, 2 connectors and 1 crystal. It belongs with the keyboards and input boards and the STM32 boards of this library.
Main components
1Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5, C6, C8, C9, C10 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H1, H2, H3, H4 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4 |
| 2 | 10p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C7 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | LP5907MFX-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | USB_C_Receptacle | easyeda2kicad:USB-C-SMD_MC-311D | J1 |
More from 3nt3/transfem-keyboard
1- 4 layers57 × 19 mm

Similar boards
- 4 layers299 × 127 mm

- 2 layers316 × 119 mm

Teensy Grovebox
jerry20091103/Teensy_Grovebox
A portable synth and music multi-tool made with Teensy 4.1
142 parts150MIT - 4 layers96 × 28 mm

- 2 layers58 × 38.3 mm

Esp32-caliper
Mew463/esp32-caliper
It features a built in 150mAh battery and a USB C interface for charging/uploading code.
44 parts59 - 4 layers231 × 67 mm

- 4 layers26.4 × 56 mm

RPI5-SDexpress Hat
will127534/RPI5-SDexpress-Hat
ctrl-c "RPI5-CFE-Hat" ctrl-v "RPI5-SDexpress-Hat"
51 parts37MIT - 6 layers90.1 × 135 mm

- 2 layers99 × 69 mm

MSI001
ATmega8/kiterf
Release KiteRF is a SDR system with K210 & FPGA & ESP32 as its core controller, which make SDR more intelligent, portable and cheap.
170 parts25MIT
Questions
What parts does the Transfem keyboard use?
27 parts, built around the LP5907MFX-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Transfem keyboard KiCad files?
From the 3nt3/transfem-keyboard repository on GitHub, at the commit this page was made from: the board is pcb/transfem-keyboard.kicad_pcb and its schematic pcb/transfem-keyboard-backups/transfem-keyboard-2025-11-14_004637/transfem-keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Transfem keyboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask 3nt3 before reusing the design.