

Stm32-linux blinkenlights
- Size
- 65 × 42 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 57
- Pads
- 154
- Tracks, vias
- 262, 38
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 3 Jul 2025
- Updated
- 16 Jul 2025
Overview
Stm32-linux blinkenlights is an open-source printed circuit board by 3nt3, from the 3nt3/stm32-linux-blinkenlights repository on GitHub. It is a 2-layer board of 65 × 42 mm with 43 parts on 57 nets, routed with 262 tracks and 38 vias.
It is built around the LP5907MFX-3.3. Its parts include 13 resistors, 10 capacitors, 10 diodes, 2 ICs and 2 connectors. It belongs with the computers and single-board computers boards and the STM32 boards of this library.
Main components
1Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 680R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R6, R7, R8, R9, R10, R11, R12, R13 |
| 10 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10 |
| 8 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C5, C6, C7, C9, C10 |
| 4 | MountingHole | MountingHole:MountingHole_3.5mm_Pad | H1, H2, H3, H4 |
| 2 | 10p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C8 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | Conn_01x04_Socket | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | LP5907MFX-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | SW_Push | easyeda2kicad:KEY-SMD_4P-L6.2-W6.5-P4.50-LS8.0_SKHMXX | SW1 |
| 1 | USB_C_Receptacle | easyeda2kicad:USB-C-SMD_MC-311D | J1 |
Similar boards
- 4 layers299 × 127 mm

- 2 layers316 × 119 mm

Teensy Grovebox
jerry20091103/Teensy_Grovebox
A portable synth and music multi-tool made with Teensy 4.1
142 parts150MIT - 4 layers96 × 28 mm

- 2 layers58 × 38.3 mm

Esp32-caliper
Mew463/esp32-caliper
It features a built in 150mAh battery and a USB C interface for charging/uploading code.
44 parts59 - 4 layers231 × 67 mm

- 4 layers26.4 × 56 mm

RPI5-SDexpress Hat
will127534/RPI5-SDexpress-Hat
ctrl-c "RPI5-CFE-Hat" ctrl-v "RPI5-SDexpress-Hat"
51 parts37MIT - 6 layers90.1 × 135 mm

- 2 layers99 × 69 mm

MSI001
ATmega8/kiterf
Release KiteRF is a SDR system with K210 & FPGA & ESP32 as its core controller, which make SDR more intelligent, portable and cheap.
170 parts25MIT
Questions
How big is the Stm32-linux blinkenlights PCB?
It measures 65 × 42 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Stm32-linux blinkenlights use?
43 parts, built around the LP5907MFX-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stm32-linux blinkenlights KiCad files?
From the 3nt3/stm32-linux-blinkenlights repository on GitHub, at the commit this page was made from: the board is pcb/stm32-linux-blinkenlights.kicad_pcb and its schematic pcb/stm32-linux-blinkenlights.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stm32-linux blinkenlights design in my own project?
Its repository states no licence, so its author keeps all rights: ask 3nt3 before reusing the design.