

Coffee scale
- Size
- 70 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 50
- Pads
- 143
- Tracks, vias
- 30, 6
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 28 May 2026
- Updated
- 28 May 2026
Overview
Coffee scale is an open-source printed circuit board by 3nt3, from the 3nt3/coffee-scale repository on GitHub. It is a 2-layer board of 70 × 70 mm with 26 parts on 50 nets, routed with 30 tracks and 6 vias.
It is built around the CH340E, HX711 and LP5907MFX-3.3. Its parts include 12 capacitors, 8 ICs, 5 resistors and 1 connector. It belongs with the RISC-V boards of this library.
Main components
3CH340E
MSOP-10150uA 20mA 2Mbps 3.3V、5V Transceiver USB 2.0 MSOP-10 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersHX711
SOP-16-40℃~+85℃ 1.4mA 10Hz、80Hz 1MHz~20MHz、11.0592MHz 2 2.6V~5.5V 20mV、40mV、80mV 24 Built-in External、Built-in SPI Support Yes SOP-16 Analog to Digital Converters (ADC) ROHSAvia SemiconAnalog To Digital Converters (ADC)LP5907MFX-3.3
SOT-23-5-40℃~+125℃@(Tj) 1 10uVrms 12uA 250mA 250mV@(250mA) 3.3V 5.5V 82dB@(1kHz) Fixed Positive Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Output discharge SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3, C6, C7, C8, C9, C11, C12 |
| 4 | 5k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R4, R5 |
| 4 | D168K | Display_7Segment:D1X8K | U4, U6, U7, U8 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | CH32V003FxPx | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | CH340E | Package_SO:MSOP-10_3x3mm_P0.5mm | U9 |
| 1 | HX711 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | LP5907MFX-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | USB_C_Receptacle_USB2.0_14P | easyeda2kicad:USB-C-SMD_MC-311D | J2 |
More from 3nt3/coffee-scale
1- 2 layers85.5 × 48.9 mm

Similar boards
- 4 layers299 × 127 mm

- 2 layers316 × 119 mm

Teensy Grovebox
jerry20091103/Teensy_Grovebox
A portable synth and music multi-tool made with Teensy 4.1
142 parts150MIT - 4 layers96 × 28 mm

- 2 layers58 × 38.3 mm

Esp32-caliper
Mew463/esp32-caliper
It features a built in 150mAh battery and a USB C interface for charging/uploading code.
44 parts59 - 4 layers231 × 67 mm

- 4 layers26.4 × 56 mm

RPI5-SDexpress Hat
will127534/RPI5-SDexpress-Hat
ctrl-c "RPI5-CFE-Hat" ctrl-v "RPI5-SDexpress-Hat"
51 parts37MIT - 6 layers90.1 × 135 mm

- 2 layers99 × 69 mm

MSI001
ATmega8/kiterf
Release KiteRF is a SDR system with K210 & FPGA & ESP32 as its core controller, which make SDR more intelligent, portable and cheap.
170 parts25MIT
Questions
How big is the Coffee scale PCB?
It measures 70 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Coffee scale use?
26 parts, built around the CH340E, HX711 and LP5907MFX-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Coffee scale KiCad files?
From the 3nt3/coffee-scale repository on GitHub, at the commit this page was made from: the board is pcb/coffee-scale.kicad_pcb and its schematic pcb/coffee-scale.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Coffee scale design in my own project?
Its repository states no licence, so its author keeps all rights: ask 3nt3 before reusing the design.