
SDWire
3mdeb/sd-mux
Control application for SD Wire imported from: https://git.tizen.org/cgit/tools/testlab/sd-mux/

Control application for SD Wire imported from: https://git.tizen.org/cgit/tools/testlab/sd-mux/
Usd adapter is an open-source printed circuit board by 3mdeb, from the 3mdeb/sd-mux repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 14.2 × 30 mm with 2 parts on 8 nets, routed with 351 tracks and 0 vias.
It belongs with the interfaces and adapters boards of this library.
sd-mux stands for Secure Digital Multiplexer.
This is SD card switcher (multiplexer) designed to help automatic testing.
This project is sd-mux controller - binary for controlling sd-mux device.
Requirements:
Build:
Install:
Note: If you want to install files into different directory then add argument to cmake command: cmake -DCMAKE_INSTALL_PREFIX=/usr .. Then again run: make make install
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | CONN_02X04 | connectors:strip_2x4_1.27 | P1 |
| 1 | usd-plug | connectors:usd | J1 |

3mdeb/sd-mux
Control application for SD Wire imported from: https://git.tizen.org/cgit/tools/testlab/sd-mux/

3mdeb/sd-mux
Control application for SD Wire imported from: https://git.tizen.org/cgit/tools/testlab/sd-mux/

hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

It measures 14.2 × 30 mm and has 2 copper layers, 1.6 mm thick.
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the 3mdeb/sd-mux repository on GitHub, at the commit this page was made from: the board is doc/hardware/usd-adapter/usd-adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).