

Helper switch
Eurorack module development kit
- Size
- 15.5 × 25.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 9
- Pads
- 15
- Tracks, vias
- 22, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 24 May 2023
- Updated
- 19 Jan 2024
Overview
Helper switch is an open-source printed circuit board by 30350n, from the 30350n/spark-inducer repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 15.5 × 25.8 mm with 7 parts on 9 nets, routed with 22 tracks and 0 vias.
Its parts include 6 connectors and 1 switch. It belongs with the audio and music boards of this library.
README
README.mdParts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | +12V_IN | Protorack:TestPoint_THTPad_1.8x1.8mm_Drill1.0mm | J3 |
| 1 | +12V_OUT | Protorack:TestPoint_THTPad_1.8x1.8mm_Drill1.0mm | J4 |
| 1 | +5V_IN | Protorack:TestPoint_THTPad_1.8x1.8mm_Drill1.0mm | J1 |
| 1 | +5V_OUT | Protorack:TestPoint_THTPad_1.8x1.8mm_Drill1.0mm | J2 |
| 1 | -12V_IN | Protorack:TestPoint_THTPad_1.8x1.8mm_Drill1.0mm | J5 |
| 1 | -12V_OUT | Protorack:TestPoint_THTPad_1.8x1.8mm_Drill1.0mm | J6 |
| 1 | POWER | Protorack:CW_GF-161-3011 | SW1 |
More from 30350n/spark-inducer
2- 2 layers233.3 × 128.5 mm

- 2 layers12 × 15.5 mm

Similar boards
- 2 layers

Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT - 2 layers40 × 20 mm

- 2 layers19.8 × 30 mm

- 2 layers35.6 × 58.2 mm

Display Carrier
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
7 parts1.7kGPL-3.0 - 2 layers20.3 × 16.3 mm

- 2 layers26 × 44 mm

Compact carrier board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
7 parts1.1k - 2 layers26.4 × 53.8 mm

Atari pickup
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
7 parts1kGPL-3.0 - 2 layers

Questions
How big is the Helper switch PCB?
It measures 15.5 × 25.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Helper switch use?
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Helper switch KiCad files?
From the 30350n/spark-inducer repository on GitHub, at the commit this page was made from: the board is helper-switch/helper-switch.kicad_pcb and its schematic helper-jack/helper-jack.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Helper switch design in my own project?
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
