
Sub
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Line Follower PID is an open-source printed circuit board by 0xShyamRavi, from the 0xShyamRavi/PID-Line-Follower-Robot repository on GitHub. It is a 2-layer board of 69.8 × 57.2 mm with 15 parts on 42 nets, routed with 226 tracks and 17 vias.
Its parts include 7 connectors, 5 capacitors and 3 ICs. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | Conn_01x08_Pin | Connector_PinHeader_2.00mm:PinHeader_1x08_P2.00mm_Vertical | J2, J6 |
| 1 | 0.1u | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C4 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C5 |
| 1 | 10uF, 20V | Capacitor_Tantalum_SMD:CP_EIA-3528-12_Kemet-T | C3 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | ESP32-DEVKIT-V1 | ESP32-DEVKIT-V1:MODULE_ESP32_DEVKIT_V1 | U1 |
| 1 | IR Sensor | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J7 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | Motor 1 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J4 |
| 1 | Motor 2 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J5 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | TB6612FNG | Package_SO:SSOP-24_5.3x8.2mm_P0.65mm | U2 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

kenp-io/not-for-airpods-repairs
The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk

It measures 69.8 × 57.2 mm and has 2 copper layers, 1.6 mm thick.
15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the 0xShyamRavi/PID-Line-Follower-Robot repository on GitHub, at the commit this page was made from: the board is Line Follower PID.kicad_pcb and its schematic Line Follower PID.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask 0xShyamRavi before reusing the design.